I started receiving the following message from my cutomers computer
ALARM! RAID configuration problem
Current configuration is:
Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0] hdb3[1]
264960 blocks [2/2] [UU]
md1 : active raid1 hda2[0] hdb2[1]
194988864 blocks [2/2] [UU]
md0 : active raid1 hda1[0] hdb1[1]
104320 blocks [2/2] [UU]
unused devices: <none>
Last known good configuration was:
Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0] hdb3[1]
264960 blocks [2/2] [UU]
md1 : active raid1 hda2[0] hdb2[1]
194988864 blocks [2/2] [UU]
[>....................] resync = 1.6% (3217672/194988864) finish=328.7min speed=9719K/sec
md0 : active raid1 hda1[0] hdb1[1]
104320 blocks [2/2] [UU]
unused devices: <none>
I did a little testing with software from the drive manufacture to determein that hda was the problem, and we will replace the drive and re-build the raid.
My question being a newbie is how can I tell from this report which drive is bad?
Thanks
Bob