Topic: Server hardware

[Michael Schmidt]

Hello,

I want to set up a new server with SME. Is the following hardware supported by SME-Server?

Processor: 2x Intel XEON 2,4 GHz/512kB Cache
RAM:        4x512MB PC266 DIMM
Board:       Intel SE7501HG2; DualXeon, PCI 3 x 64Bit+3x32Bit, 2xLAN;SCSI
Raid:         Intel SRCU42L; 64Bit PCI; Raid 0,1,5,10; 64MB
HDD:         4xSeagate Cheetah 73,4 GB, 10k, U320, 4.7ms

I want to run raid 5, the server is server only.

Thanks for your help.

Greets
Michael

[Graeme Fleming]

Check the Redhat site for supported hardware for RH7.x then determine which (if any) version of SME will work - with this spec I'd guess 6b3 would be your best bet

[Michael Schmidt]

Thanks for the fast answer.
I checked the RedHat-Site and it looks goot. I'll give it a try.

[Michael Schmidt]

Yesterday I installed sme 6.0b3 on our new server.

Must say: It runs like a dream! Thanks to mitel for the really great job!

But for the ultimate happyness I want to use my second 1000MB-nic in the SAME network like eth0 (i.e. eth0 192.168.1.1, eth1 192.168.1.2). But I think this isn't possible, is it?