Topic: 6.0 Install

[Mark Allison]

Can 6.0b3 be installed over 5.6?  Is there anything special that I need to do before the install/upgrade to insure that I don't loose the current configuration?

Thanks,
Mark

[Guck Puppy]

Mark Allison wrote:

> Can 6.0b3 be installed over 5.6?  
Yep.

> Is there anything special that I need to do before the install/upgrade
No. You should of course do a complete backup...

> to insure that I don't loose the current configuration?
Just upgrading should make sure your configuration remains "tight".

G

[rick]

As long as you have no added packages (3rd party add ons) on your 5.6 install then you can expect it to go smoothly. Don't forget to do all the post beta 3 updates also.

[Mark Allison]

I've done the upgrade and I've run into a problem.  The server boots fine, but I can't ping it, http to it or receive an IP address from the DHCP server.  An suggestions?

[Laurent DINCLAUX]

Maybe run the configuration from the console (login as admin)

The update went very well for me.

[rick]

Try reversing the ethernet cables, either physically or in the server manager setup. I have seen this before where it selected the internal and external cards incorrectly when doing an upgrade.