Hi,
I specify the path in RsyncShareName, but backuppc still didn't backup folders in the path to backuppc server. The configuration is here. Please correct if there is anything wrong. I would like to use backuppc running on user Niceman.sy to backup /usr folder from host kevin.sy using rsync. The host is using linux also. If the code I pasted is too lengthy, I would also appreciate if someone could just point out which are the necessary path for me to edit in order to run the backup, and leave other parameters unchanged.
$Conf{ServerHost} = 'Niceman.sy';
$Conf{ServerPort} = -1;
$Conf{MyPath} = '/bin';
$Conf{UmaskMode} = 027;
$Conf{WakeupSchedule} = [1..23];
$Conf{MaxBackups} = 4;
$Conf{MaxUserBackups} = 4;
$Conf{MaxPendingCmds} = 10;
$Conf{MaxBackupPCNightlyJobs} = 2;
$Conf{MaxOldLogFiles} = 14;
$Conf{DfPath} = '/bin/df';
$Conf{DfCmd} = '$dfPath $topDir';
$Conf{SplitPath} = '/usr/bin/split';
$Conf{ParPath} = '/usr/bin/par2';
$Conf{CatPath} = '/bin/cat';
$Conf{GzipPath} = '/bin/gzip';
$Conf{Bzip2Path} = '/usr/bin/bzip2';
$Conf{DfMaxUsagePct} = 95;
$Conf{TrashCleanSleepSec} = 300;
$Conf{DHCPAddressRanges} = [];
$Conf{BackupPCUser} = 'root';
$Conf{CgiDir} = '/var/www/cgi-bin/BackupPC';
$Conf{InstallDir} = '/usr/local/BackupPC';
$Conf{BackupPCUserVerify} = 1;
$Conf{HardLinkMax} = 31999;
$Conf{SmbShareName} = 'C$';
$Conf{SmbSharePasswd} = '';
$Conf{TarShareName} = '/';
$Conf{FullPeriod} = 6.97;
$Conf{IncrPeriod} = 0.97;
$Conf{FullKeepCnt} = 1;
$Conf{FullKeepCntMin} = 1;
$Conf{FullAgeMax} = 90;
$Conf{IncrKeepCnt} = 6;
$Conf{IncrKeepCntMin} = 1;
$Conf{IncrAgeMax} = 30;
$Conf{PartialAgeMax} = 3;
$Conf{IncrFill} = 0;
$Conf{RestoreInfoKeepCnt} = 10;
$Conf{ArchiveInfoKeepCnt} = 10;
$Conf{BackupFilesOnly} = undef;
$Conf{BackupFilesExclude} = undef;
$Conf{BlackoutBadPingLimit} = 3;
$Conf{BlackoutGoodCnt} = 7;
$Conf{BlackoutPeriods} = [
{
hourBegin => 7.0,
hourEnd => 19.5,
weekDays => [1, 2, 3, 4, 5],
},
];
$Conf{XferMethod} = 'rsync';
$Conf{XferLogLevel} = 1;
$Conf{SmbClientPath} = '/usr/bin/smbclient';
$Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tc$X_option - $fileList';
$Conf{SmbClientIncrCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -TcN$X_option $timeStampFile - $fileList';
$Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tx -';
$Conf{TarClientCmd} = '$sshPath -q -x -n -l root $host'
. ' $tarPath -c -v -f - -C $shareName+'
. ' --totals';
$Conf{TarFullArgs} = '$fileList+';
$Conf{TarClientRestoreCmd} = '$sshPath -q -x -l root $host'
. ' $tarPath -x -p --numeric-owner --same-owner'
. ' -v -f - -C $shareName+';
$Conf{TarClientPath} = '/bin/gtar';
$Conf{RsyncClientPath} = '/usr/bin/rsync';
$Conf{RsyncClientCmd} = '$sshPath -q -x -l root $kevin $/usr/bin/rsync $argList+' ;
$Conf{RsyncClientRestoreCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
$Conf{RsyncClientRestoreCmd} = '$sshPath -q -x -l root $kevin $/usr/bin/rsync $argList+';
$Conf{RsyncShareName} = '/';
$Conf{RsyncdClientPort} = 873;
#
# Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd".
# The user name and password are stored on the client in whatever file
# the "secrets file" parameter in rsyncd.conf points to
# (eg: /etc/rsyncd.secrets).
#
$Conf{RsyncdUserName} = '';
#
# Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd".
# The user name and password are stored on the client in whatever file
# the "secrets file" parameter in rsyncd.conf points to
# (eg: /etc/rsyncd.secrets).
#
$Conf{RsyncdPasswd} = '';
#
# Whether authentication is mandatory when connecting to the client's
# rsyncd. By default this is on, ensuring that BackupPC will refuse to
# connect to an rsyncd on the client that is not password protected.
# Turn off at your own risk.
#
$Conf{RsyncdAuthRequired} = 1;
#
# When rsync checksum caching is enabled (by adding the
# --checksum-seed=32761 option to $Conf{RsyncArgs}), the cached
# checksums can be occaisonally verified to make sure the file
# contents matches the cached checksums. This is to avoid the
# risk that disk problems might cause the pool file contents to
# get corrupted, but the cached checksums would make BackupPC
# think that the file still matches the client.
#
# This setting is the probability (0 means never and 1 means always)
# that a file will be rechecked. Setting it to 0 means the checksums
# will not be rechecked (unless there is a phase 0 failure). Setting
# it to 1 (ie: 100%) means all files will be checked, but that is
# not a desirable setting since you are better off simply turning
# caching off (ie: remove the --checksum-seed option).
#
# The default of 0.01 means 1% (on average) of the files during a full
# backup will have their cached checksum re-checked.
#
# This setting has no effect unless checksum caching is turned on.
#
$Conf{RsyncCsumCacheVerifyProb} = 0.01;
#
# Arguments to rsync for backup. Do not edit the first set unless you
# have a thorough understanding of how File::RsyncP works.
#
# Examples of additional arguments that should work are --exclude/--include,
# eg:
#
# $Conf{RsyncArgs} = [
# # original arguments here
# '-v',
# '--exclude', '/proc',
# '--exclude', '*.tmp',
# ];
#
$Conf{RsyncArgs} = [
#
# Do not edit these!
#
'--numeric-ids',
'--perms',
'--owner',
'--group',
'--devices',
'--links',
'--times',
'--block-size=2048',
'--recursive',
#
# If you are using a patched client rsync that supports the
# --checksum-seed option (see
http://backuppc.sourceforge.net),
# then uncomment this to enabled rsync checksum cachcing
#
#'--checksum-seed=32761',
#
# Add additional arguments here
#
];
#
# Arguments to rsync for restore. Do not edit the first set unless you
# have a thorough understanding of how File::RsyncP works.
#
# If you want to disable direct restores using rsync (eg: is the module
# is read-only), you should set $Conf{RsyncRestoreArgs} to undef and
# the corresponding CGI restore option will be removed.
#
$Conf{RsyncRestoreArgs} = [
#
# Do not edit these!
#
'--numeric-ids',
'--perms',
'--owner',
'--group',
'--devices',
'--links',
'--times',
'--block-size=2048',
'--relative',
'--ignore-times',
'--recursive',
#
# If you are using a patched client rsync that supports the
# --checksum-seed option (see
http://backuppc.sourceforge.net),
# then uncomment this to enabled rsync checksum cachcing
#
#'--checksum-seed=32761',
#
# Add additional arguments here
#
];
#
# Archive Destination
#
# The Destination of the archive
# e.g. /tmp for file archive or /dev/nst0 for device archive
#
$Conf{ArchiveDest} = '/tmp';
#
# Archive Compression type
#
# The valid values are:
#
# - 'none': No Compression
#
# - 'gzip': Medium Compression. Recommended.
#
# - 'bzip2': High Compression but takes longer.
#
$Conf{ArchiveComp} = 'gzip';
#
# Archive Parity Files
#
# The amount of Parity data to generate, as a percentage
# of the archive size.
# Uses the commandline par2 (par2cmdline) available from
#
http://parchive.sourceforge.net#
# Only useful for file dumps.
#
# Set to 0 to disable this feature.
#
$Conf{ArchivePar} = 0;
#
# Archive Size Split
#
# Only for file archives. Splits the output into
# the specified size * 1,000,000.
# e.g. to split into 650,000,000 bytes, specify 650 below.
#
# If the value is 0, or if $Conf{ArchiveDest} is an existing file or
# device (e.g. a streaming tape drive), this feature is disabled.
#
$Conf{ArchiveSplit} = 0;
#
# Archive Command
#
# This is the command that is called to actually run the archive process
# for each host. The following variables are substituted at run-time:
#
# $Installdir The installation directory of BackupPC
# $tarCreatePath The path to BackupPC_tarCreate
# $splitpath The path to the split program
# $parpath The path to the par2 program
# $host The host to archive
# $backupnumber The backup number of the host to archive
# $compression The path to the compression program
# $compext The extension assigned to the compression type
# $splitsize The number of bytes to split archives into
# $archiveloc The location to put the archive
# $parfile The amount of parity data to create (percentage)
#
$Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archiveHost'
. ' $tarCreatePath $splitpath $parpath $host $backupnumber'
. ' $compression $compext $splitsize $archiveloc $parfile *';
#
# Full path for ssh. Security caution: normal users should not
# allowed to write to this file or directory.
#
$Conf{SshPath} = '/usr/bin/ssh';
#
# Full path for nmblookup. Security caution: normal users should not
# allowed to write to this file or directory.
#
# nmblookup is from the Samba distribution. nmblookup is used to get the
# netbios name, necessary for DHCP hosts.
#
$Conf{NmbLookupPath} = '/usr/bin/nmblookup';
#
# NmbLookup command. Given an IP address, does an nmblookup on that
# IP address. The following variables are substituted at run-time:
#
# $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath})
# $host IP address
#
# This command is only used for DHCP hosts: given an IP address, this
# command should try to find its NetBios name.
#
$Conf{NmbLookupCmd} = '$nmbLookupPath -A $host';
#
# NmbLookup command. Given a netbios name, finds that host by doing
# a NetBios lookup. Several variables are substituted at run-time:
#
# $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath})
# $host NetBios name
#
# In some cases you might need to change the broadcast address, for
# example if nmblookup uses 192.168.255.255 by default and you find
# that doesn't work, try 192.168.1.255 (or your equivalent class C
# address) using the -B option:
#
# $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -B 192.168.1.255 $host';
#
# If you use a WINS server and your machines don't respond to
# multicast NetBios requests you can use this (replace 1.2.3.4
# with the IP address of your WINS server):
#
# $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -R -U 1.2.3.4 $host';
#
# This is preferred over multicast since it minimizes network traffic.
#
# Experiment manually for your site to see what form of nmblookup command
# works.
#
$Conf{NmbLookupFindHostCmd} = '$nmbLookupPath $host';
#
# For fixed IP address hosts, BackupPC_dump can also verify the netbios
# name to ensure it matches the host name. An error is generated if
# they do not match. Typically this flag is off. But if you are going
# to transition a bunch of machines from fixed host addresses to DHCP,
# setting this flag is a great way to verify that the machines have
# their netbios name set correctly before turning on DCHP.
#
$Conf{FixedIPNetBiosNameCheck} = 0;
#
# Full path to the ping command. Security caution: normal users
# should not be allowed to write to this file or directory.
#
# If you want to disable ping checking, set this to some program
# that exits with 0 status, eg:
#
# $Conf{PingPath} = '/bin/echo';
#
$Conf{PingPath} = '/bin/ping';
#
# Ping command. The following variables are substituted at run-time:
#
# $pingPath path to ping ($Conf{PingPath})
# $host host name
#
# Wade Brown reports that on solaris 2.6 and 2.7 ping -s returns the wrong
# exit status (0 even on failure). Replace with "ping $host 1", which
# gets the correct exit status but we don't get the round-trip time.
#
$Conf{PingCmd} = '$pingPath -c 1 -w 3 $host';
#
# Path to init.d script and command to use that script to start the
# server from the CGI interface. The following variables are substituted
# at run-time:
#
# $sshPath path to ssh ($Conf{SshPath})
# $serverHost same as $Conf{ServerHost}
# $serverInitdPath path to init.d script ($Conf{ServerInitdPath})
#
# Example:
#
# $Conf{ServerInitdPath} = '/etc/init.d/backuppc';
# $Conf{ServerInitdStartCmd} = '$sshPath -q -x -l root $serverHost'
# . ' $serverInitdPath start'
# . ' < /dev/null >& /dev/null';
#
$Conf{ServerInitdPath} = '';
$Conf{ServerInitdStartCmd} = '';
#
# Compression level to use on files. 0 means no compression. Compression
# levels can be from 1 (least cpu time, slightly worse compression) to
# 9 (most cpu time, slightly better compression). The recommended value
# is 3. Changing to 5, for example, will take maybe 20% more cpu time
# and will get another 2-3% additional compression. See the zlib
# documentation for more information about compression levels.
#
# Changing compression on or off after backups have already been done
# will require both compressed and uncompressed pool files to be stored.
# This will increase the pool storage requirements, at least until all
# the old backups expire and are deleted.
#
# It is ok to change the compression value (from one non-zero value to
# another non-zero value) after dumps are already done. Since BackupPC
# matches pool files by comparing the uncompressed versions, it will still
# correctly match new incoming files against existing pool files. The
# new compression level will take effect only for new files that are
# newly compressed and added to the pool.
#
# If compression was off and you are enabling compression for the first
# time you can use the BackupPC_compressPool utility to compress the
# pool. This avoids having the pool grow to accommodate both compressed
# and uncompressed backups. See the documentation for more information.
#
# Note: compression needs the Compress::Zlib perl library. If the
# Compress::Zlib library can't be found then $Conf{CompressLevel} is
# forced to 0 (compression off).
#
$Conf{CompressLevel} = 0;
#
# Maximum round-trip ping time in milliseconds. This threshold is set
# to avoid backing up PCs that are remotely connected through WAN or
# dialup connections. The output from ping -s (assuming it is supported
# on your system) is used to check the round-trip packet time. On your
# local LAN round-trip times should be much less than 20msec. On most
# WAN or dialup connections the round-trip time will be typically more
# than 20msec. Tune if necessary.
#
$Conf{PingMaxMsec} = 20;
#
# Timeout in seconds when listening for the transport program's
# (smbclient, tar etc) stdout. If no output is received during this
# time, then it is assumed that something has wedged during a backup,
# and the backup is terminated.
#
# Note that stdout buffering combined with huge files being backed up
# could cause longish delays in the output from smbclient that
# BackupPC_dump sees, so in rare cases you might want to increase
# this value.
#
# Despite the name, this parameter sets the timeout for all transport
# methods (tar, smb etc).
#
$Conf{ClientTimeout} = 7200;
#
# Maximum number of log files we keep around in each PC's directory
# (ie: pc/$host). These files are aged monthly. A setting of 12
# means there will be at most the files LOG, LOG.0, LOG.1, ... LOG.11
# in the pc/$host directory (ie: about a years worth). (Except this
# month's LOG, these files will have a .z extension if compression
# is on).
#
# If you decrease this number after BackupPC has been running for a
# while you will have to manually remove the older log files.
#
$Conf{MaxOldPerPCLogFiles} = 12;
#
# Optional commands to run before and after dumps and restores.
# Stdout from these commands will be written to the Xfer (or Restore)
# log file. One example of using these commands would be to
# shut down and restart a database server, or to dump a database
# to files for backup. Example:
#
# $Conf{DumpPreUserCmd} = '$sshPath -q -x -l root $host /usr/bin/dumpMysql';
#
# The following variable substitutions are made at run time for
# $Conf{DumpPreUserCmd} and $Conf{DumpPostUserCmd}:
#
# $type type of dump (incr or full)
# $xferOK 1 if the dump succeeded, 0 if it didn't
# $client client name being backed up
# $host host name (could be different from client name if
# $Conf{ClientNameAlias} is set)
# $hostIP IP address of host
# $user user name from the hosts file
# $moreUsers list of additional users from the hosts file
# $share the first share name
# $shares list of all the share names
# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
# $sshPath value of $Conf{SshPath},
# $cmdType set to DumpPreUserCmd or DumpPostUserCmd
#
# The following variable substitutions are made at run time for
# $Conf{RestorePreUserCmd} and $Conf{RestorePostUserCmd}:
#
# $client client name being backed up
# $xferOK 1 if the restore succeeded, 0 if it didn't
# $host host name (could be different from client name if
# $Conf{ClientNameAlias} is set)
# $hostIP IP address of host
# $user user name from the hosts file
# $moreUsers list of additional users from the hosts file
# $share the first share name
# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
# $sshPath value of $Conf{SshPath},
# $type set to "restore"
# $bkupSrcHost host name of the restore source
# $bkupSrcShare share name of the restore source
# $bkupSrcNum backup number of the restore source
# $pathHdrSrc common starting path of restore source
# $pathHdrDest common starting path of destination
# $fileList list of files being restored
# $cmdType set to RestorePreUserCmd or RestorePostUserCmd
#
# The following variable substitutions are made at run time for
# $Conf{ArchivePreUserCmd} and $Conf{ArchivePostUserCmd}:
#
# $client client name being backed up
# $xferOK 1 if the archive succeeded, 0 if it didn't
# $host Name of the archive host
# $user user name from the hosts file
# $share the first share name
# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
# $HostList list of hosts being archived
# $BackupList list of backup numbers for the hosts being archived
# $archiveloc location where the archive is sent to
# $parfile amount of parity data being generated (percentage)
# $compression compression program being used (eg: cat, gzip, bzip2)
# $compext extension used for compression type (eg: raw, gz, bz2)
# $splitsize size of the files that the archive creates
# $sshPath value of $Conf{SshPath},
# $type set to "archive"
# $cmdType set to ArchivePreUserCmd or ArchivePostUserCmd
#
$Conf{DumpPreUserCmd} = undef;
$Conf{DumpPostUserCmd} = undef;
$Conf{RestorePreUserCmd} = undef;
$Conf{RestorePostUserCmd} = undef;
$Conf{ArchivePreUserCmd} = undef;
$Conf{ArchivePostUserCmd} = undef;
#
# Override the client's host name. This allows multiple clients
# to all refer to the same physical host. This should only be
# set in the per-PC config file and is only used by BackupPC at
# the last moment prior to generating the command used to backup
# that machine (ie: the value of $Conf{ClientNameAlias} is invisible
# everywhere else in BackupPC). The setting can be a host name or
# IP address, eg:
#
# $Conf{ClientNameAlias} = 'realHostName';
# $Conf{ClientNameAlias} = '192.1.1.15';
#
# will cause the relevant smb/tar/rsync backup/restore commands to be
# directed to realHostName, not the client name.
#
# Note: this setting doesn't work for hosts with DHCP set to 1.
#
$Conf{ClientNameAlias} = undef;
#
# Advanced option for asking BackupPC to load additional perl modules.
# Can be a list (array ref) of module names to load at startup.
#
$Conf{PerlModuleLoad} = undef;
###########################################################################
# Email reminders, status and messages
# (can be overridden in the per-PC config.pl)
###########################################################################
#
# Full path to the sendmail command. Security caution: normal users
# should not allowed to write to this file or directory.
#
$Conf{SendmailPath} = '/usr/sbin/sendmail';
#
# Minimum period between consecutive emails to a single user.
# This tries to keep annoying email to users to a reasonable
# level. Email checks are done nightly, so this number is effectively
# rounded up (ie: 2.5 means a user will never receive email more
# than once every 3 days).
#
$Conf{EMailNotifyMinDays} = 2.5;
#
# Name to use as the "from" name for email. Depending upon your mail
# handler this is either a plain name (eg: "admin") or a fully-qualified
# name (eg: "admin@mydomain.com").
#
$Conf{EMailFromUserName} = 'root';
#
# Destination address to an administrative user who will receive a
# nightly email with warnings and errors. If there are no warnings
# or errors then no email will be sent. Depending upon your mail
# handler this is either a plain name (eg: "admin") or a fully-qualified
# name (eg: "admin@mydomain.com").
#
$Conf{EMailAdminUserName} = 'root';
#
# Destination domain name for email sent to users. By default
# this is empty, meaning email is sent to plain, unqualified
# addresses. Otherwise, set it to the destintation domain, eg:
#
# $Cong{EMailUserDestDomain} = '@mydomain.com';
#
# With this setting user email will be set to 'user@mydomain.com'.
#
$Conf{EMailUserDestDomain} = '';
#
# This subject and message is sent to a user if their PC has never been
# backed up.
#
# These values are language-dependent. The default versions can be
# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
# need to change the message, copy it here and edit it, eg:
#
# $Conf{EMailNoBackupEverMesg} = <<'EOF';
# To: $user$domain
# cc:
# Subject: $subj
#
# Dear $userName,
#
# This is a site-specific email message.
# EOF
#
$Conf{EMailNoBackupEverSubj} = undef;
$Conf{EMailNoBackupEverMesg} = undef;
#
# How old the most recent backup has to be before notifying user.
# When there have been no backups in this number of days the user
# is sent an email.
#
$Conf{EMailNotifyOldBackupDays} = 7.0;
#
# This subject and message is sent to a user if their PC has not recently
# been backed up (ie: more than $Conf{EMailNotifyOldBackupDays} days ago).
#
# These values are language-dependent. The default versions can be
# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
# need to change the message, copy it here and edit it, eg:
#
# $Conf{EMailNoBackupRecentMesg} = <<'EOF';
# To: $user$domain
# cc:
# Subject: $subj
#
# Dear $userName,
#
# This is a site-specific email message.
# EOF
#
$Conf{EMailNoBackupRecentSubj} = undef;
$Conf{EMailNoBackupRecentMesg} = undef;
#
# How old the most recent backup of Outlook files has to be before
# notifying user.
#
$Conf{EMailNotifyOldOutlookDays} = 5.0;
#
# This subject and message is sent to a user if their Outlook files have
# not recently been backed up (ie: more than $Conf{EMailNotifyOldOutlookDays}
# days ago).
#
# These values are language-dependent. The default versions can be
# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
# need to change the message, copy it here and edit it, eg:
#
# $Conf{EMailOutlookBackupMesg} = <<'EOF';
# To: $user$domain
# cc:
# Subject: $subj
#
# Dear $userName,
#
# This is a site-specific email message.
# EOF
#
$Conf{EMailOutlookBackupSubj} = undef;
$Conf{EMailOutlookBackupMesg} = undef;
###########################################################################
# CGI user interface configuration settings
# (can be overridden in the per-PC config.pl)
###########################################################################
#
# Normal users can only access information specific to their host.
# They can start/stop/browse/restore backups.
#
# Administrative users have full access to all hosts, plus overall
# status and log information.
#
# The administrative users are the union of the unix/linux group
# $Conf{CgiAdminUserGroup} and the manual list of users, separated
# by spaces, in $Conf{CgiAdminUsers}. If you don't want a group or
# manual list of users set the corresponding configuration setting
# to undef or an empty string.
#
# If you want every user to have admin privileges (careful!), set
# $Conf{CgiAdminUsers} = '*'.
#
# Examples:
# $Conf{CgiAdminUserGroup} = 'admin';
# $Conf{CgiAdminUsers} = 'craig celia';
# --> administrative users are the union of group admin, plus
# craig and celia.
#
# $Conf{CgiAdminUserGroup} = '';
# $Conf{CgiAdminUsers} = 'craig celia';
# --> administrative users are only craig and celia'.
#
$Conf{CgiAdminUserGroup} = '';
$Conf{CgiAdminUsers} = '';
#
# URL of the BackupPC_Admin CGI script. Used for email messages.
#
$Conf{CgiURL} = '
http://Niceman.shinyang/cgi-bin/BackupPC/BackupPC_Admin';#
# Language to use. See lib/BackupPC/Lang for the list of supported
# languages, which include English (en), French (fr), Spanish (es),
# German (de), Italian (it) and Dutch (nl).
#
# Currently the Language setting applies to the CGI interface and email
# messages sent to users. Log files and other text are still in English.
#
$Conf{Language} = 'en';
#
# User names that are rendered by the CGI interface can be turned
# into links into their home page or other information about the
# user. To set this up you need to create two sprintf() strings,
# that each contain a single '%s' that will be replaced by the user
# name. The default is a mailto: link.
#
# $Conf{CgiUserHomePageCheck} should be an absolute file path that
# is used to check (via "-f") that the user has a valid home page.
# Set this to undef or an empty string to turn off this check.
#
# $Conf{CgiUserUrlCreate} should be a full URL that points to the
# user's home page. Set this to undef or an empty string to turn
# off generation of URLs for user names.
#
# Example:
# $Conf{CgiUserHomePageCheck} = '/var/www/html/users/%s.html';
# $Conf{CgiUserUrlCreate} = '
http://myhost/users/%s.html';# --> if /var/www/html/users/craig.html exists, then 'craig' will
# be rendered as a link to
http://myhost/users/craig.html.
#
$Conf{CgiUserHomePageCheck} = '';
$Conf{CgiUserUrlCreate} = 'mailto:%s';
#
# Date display format for CGI interface. True for US-style dates (MM/DD)
# and zero for international dates (DD/MM).
#
$Conf{CgiDateFormatMMDD} = 1;
#
# If set, the complete list of hosts appears in the left navigation
# bar pull-down for administrators. Otherwise, just the hosts for which
# the user is listed in the host file (as either the user or in moreUsers)
# are displayed.
#
$Conf{CgiNavBarAdminAllHosts} = 1;
#
# Enable/disable the search box in the navigation bar.
#
$Conf{CgiSearchBoxEnable} = 1;
#
# Additional navigation bar links. These appear for both regular users
# and administrators. This is a list of hashes giving the link (URL)
# and the text (name) for the link. Specifying lname instead of name
# uses the language specific string (ie: $Lang->{lname}) instead of
# just literally displaying name.
#
$Conf{CgiNavBarLinks} = [
{
link => "?action=view&type=docs",
lname => "Documentation", # actually displays $Lang->{Documentation}
},
{
link => "http://backuppc.sourceforge.net/faq",
name => "FAQ", # displays literal "FAQ"
},
{
link => "http://backuppc.sourceforge.net",
name => "SourceForge", # displays literal "SourceForge"
},
];
#
# Hilight colors based on status that are used in the PC summary page.
#
$Conf{CgiStatusHilightColor} = {
Reason_backup_failed => '#ffcccc',
Reason_backup_done => '#ccffcc',
Reason_no_ping => '#ffff99',
Reason_backup_canceled_by_user => '#ff9900',
Status_backup_in_progress => '#66cc99',
};
#
# Additional CGI header text.
#
$Conf{CgiHeaders} = '<meta http-equiv="pragma" content="no-cache">';
#
# Directory where images are stored. This directory should be below
# Apache's DocumentRoot. This value isn't used by BackupPC but is
# used by configure.pl when you upgrade BackupPC.
#
# Example:
# $Conf{CgiImageDir} = '/usr/local/apache/htdocs/BackupPC';
#
$Conf{CgiImageDir} = '/usr/local/apache/htdocs/BackupPC';
#
# Additional mappings of file name extenions to Content-Type for
# individual file restore. See $Ext2ContentType in BackupPC_Admin
# for the default setting. You can add additional settings here,
# or override any default settings. Example:
#
# $Conf{CgiExt2ContentType} = {
# 'pl' => 'text/plain',
# };
#
$Conf{CgiExt2ContentType} = { };
#
# URL (without the leading
http://host) for BackupPC's image directory.
# The CGI script uses this value to serve up image files.
#
# Example:
# $Conf{CgiImageDirURL} = '/BackupPC';
#
$Conf{CgiImageDirURL} = '/BackupPC';
#
# CSS stylesheet for the CGI interface. It is stored in the
# $Conf{CgiImageDir} directory and accessed via the
# $Conf{CgiImageDirURL} URL.
#
$Conf{CgiCSSFile} = 'BackupPC_stnd.css';
68 Replies
41870 Views