Topic: Version 3 of unofficial update script

[smeghead]

A/V pointer updated

[dhardy]

oooh, that all happened very quickly

I downloaded the script, ran it, it failed on the AV, then there is a bug in the error 'mail to maintainer routine', it says something like 'missing ]' so I 've just looked at the wiki and - not knowing really what I'm doing - think this *may* be the error:

"if [ "$errormail" = "y"] ; then"

Should this be .....

"if [ "$errormail" = "y" ]; then"

?

I hacked  my copy to get the AV script from Jesper direct and then came back to post this error and found you speedy buggers had fixed the original prob with the script. Damn thats good. And its only 8am here so I'm still in my pajamas!

[dhardy]

Hi guys (again)...

I've just searched the forums for a solution to a problem with yi.org dynamic dns and found this post:

http://forums.contribs.org/index.php?topic=24163.msg97496#msg97496

Its a link to Charlie Brady's updated rpm for yi.org dynamic dns.

Any chance that could get included? Currently a fresh install with the update script run is unable to use yi.org without either a manual edit or this update.

Cheers,

David.

[stiperstones]

i have just tried to use the update script and have come up against an error.
The /plus/plus.log indicates that the norlug rpm's are not downloading.
When i go to this site http://norlug.org/?op=rpms and look at this it says at this point you need to do this if using wget

If you are having issues downloading files;
Downloading files with CLI tools:
Many folks attempt to download our RPMs using CLI tools (such as CURL and wget), and fail. This is due to the fact that the URL needs to be contained in quotes (because of special characters in the URL). If you neglect to put the URL in quotes, the download will fail.

Not quite sure what it means any help appreciated.

Thanks alan

[smeghead]

Script updated with quotes for norlug downloads - tested the wget command with the quotes and it works fine.

HTH

[stiperstones]

Thanks smeghead

alan

[stefan24]

Hi!

I changed Twiggi to Twig in the script. The latter is updated more often now and does not require any configuration in the web panel. Just install it and start http://servername_or_ip/twig/.

[specsd]

Built a new 6.0.1 box - updates ran beautifully - Thanks!  
One question - there used to be the ability to designate a user account to receive all the admin mail - I don't see this anymore.  Did I just miss it, or has the panel been changed during the updates?  

Suggested contrib to add to the script - webshare from I think it was Daryl's site?
I get a lot of use out of that one - others might too!

[Garfield]

One question - there used to be the ability to designate a user account to receive all the admin mail - I don't see this anymore.  Did I just miss it, or has the panel been changed during the updates?  

It's still there where it was: under "Configuration" there's an entry called "E-mail"  

[specsd]

It's still there where it was: under "Configuration" there's an entry called "E-mail"  

<sigh>  Thanks - Guess I'm finally losing it after all these years.  

[irule]

I installed the update script today on my 6.0.1 server-gateway, with some packages installed.
and it broke my mail!!

mail coming in is refused, and mail going out get an smtp-server error.

everything else seems to work.....

I disabled the virus scan and spam filter, and deleted everything in the rbl list.

rebooted several times, but no succes.....

[ltc6netspec]

Please list what errors you are getting.

 

[KaiNeR]

ever since i ran the install_horde30.sh i recieved these errors

Jul 16 13:25:01 p31000 HORDE[4467]: [kronolith] DB Error: no such table: SELECT vfs_data FROM horde_vfs WHERE vfs_path = '.horde/scheduler' AND vfs_name = 'horde_scheduler_kronolith' [nativecode=1146 ** Table 'horde.horde_vfs' doesn't exist] [on line 109 of "/home/httpd/html/horde/lib/Horde/Scheduler.php"]
Jul 16 13:25:01 p31000 HORDE[4467]: [kronolith] DB Error: no such table: SELECT vfs_id FROM horde_vfs WHERE vfs_path  = '.horde/scheduler' AND vfs_name = 'horde_scheduler_kronolith' [nativecode=1146 ** Table 'horde.horde_vfs' doesn't exist] [on line 73 of "/home/httpd/html/horde/lib/Horde/Scheduler.php"]

how do i stop them, i ressolve this matter,

Thanks
Anyhelp will be greatly appreciated

[mrjhb3]

ever since i ran the install_horde30.sh i recieved these errors

Jul 16 13:25:01 p31000 HORDE[4467]: [kronolith] DB Error: no such table: SELECT vfs_data FROM horde_vfs WHERE vfs_path = '.horde/scheduler' AND vfs_name = 'horde_scheduler_kronolith' [nativecode=1146 ** Table 'horde.horde_vfs' doesn't exist] [on line 109 of "/home/httpd/html/horde/lib/Horde/Scheduler.php"]
Jul 16 13:25:01 p31000 HORDE[4467]: [kronolith] DB Error: no such table: SELECT vfs_id FROM horde_vfs WHERE vfs_path  = '.horde/scheduler' AND vfs_name = 'horde_scheduler_kronolith' [nativecode=1146 ** Table 'horde.horde_vfs' doesn't exist] [on line 73 of "/home/httpd/html/horde/lib/Horde/Scheduler.php"]

how do i stop them, i ressolve this matter,

Thanks
Anyhelp will be greatly appreciated

What version did you run this on?  It appears that your horde tables were not upgrade correctly, or you changed your VFS settings within the horde configuration.

JB

[Neririn]

On a server which usually gets < 50 emails a day, my spamfilter reports that Saturday and SUnday a total of 44000+ ham emails or 1800 1/hr.  Friday I ran the update script.  It could be coincidence, but I am wondering if something that was installed freaked out my machine.  I know after the update, the server did not come back on the first reboot.

/var/log/maillog is full of this
Jul 15 19:35:42 kobe spamd[2859]: connection from localhost [127.0.0.1] at port 34400
Jul 15 19:35:42 kobe spamd[2859]: info: setuid to qmailq succeeded
Jul 15 19:35:42 kobe spamd[2859]: processing message (unknown) for qmailq:404.
Jul 15 19:35:43 kobe spamd[2859]: clean message (-5.9/5.0) for qmailq:404 in 1.0 seconds, 1159 bytes.
Jul 15 19:35:43 kobe spamd[2859]: result: . -5 - ALL_TRUSTED,AWL,BAYES_00,NO_REAL_NAME scantime=1.0,siz$
Jul 15 19:35:46 kobe spamd[2858]: connection from localhost [127.0.0.1] at port 34404
Jul 15 19:35:46 kobe spamd[2858]: info: setuid to qmailq succeeded
Jul 15 19:35:46 kobe spamd[2858]: processing message (unknown) for qmailq:404.
Jul 15 19:35:47 kobe spamd[2858]: clean message (-5.9/5.0) for qmailq:404 in 1.1 seconds, 1159 bytes.
Jul 15 19:35:47 kobe spamd[2858]: result: . -5 - ALL_TRUSTED,AWL,BAYES_00,NO_REAL_NAME scantime=1.1,siz$


Has anyone else seen this? There are no vast ammounts of email in the mailboxes, just this spamfilter report.  Any suggestions will be greatly appreciated.

Neru