Just to confirm today (05/02/07 UK) I setup an APC 350 BackUPS CS
(It didnt cost a fortune
The serial cable that APC sent out (free) is marked up 940-0128A
The closest driver match was genericups=12
[http://www.networkupstools.org/compat/stable.html]
This is what I did (as per other posts)
config setprop nut Device /dev/ttyS0
config setprop nut Model genericups
config setprop nut status enabled
genericups -x upstype=12 /dev/ttyS0
expand-template /etc/sysconfig/ups
expand-template /etc/ups/ups.conf
expand-template /etc/ups/upssched.conf
expand-template /etc/ups/upsmon.conf
expand-template /etc/ups/upsd.users
expand-template /etc/ups/upsd.conf
config show nut
svc -t /var/service/nut restart
upsc UPS@localhost
outputs :-
driver.name: genericups
driver.parameter.upstype: 12
driver.version: 2.0.4
driver.version.internal: 1.32
ups.mfr: APC
ups.model: Back-UPS Office
ups.status: OL
LOL - Does Status OL mean OFF Line or ON Line ?