Topic: blocking emule and other p2p software

[cool34000]

Hi there !

I'm very interrested in this contrib, so i'm wondering if it can work in server-only mode... And if is this contrib working on a SME v7.0 final up to date server ?

Thanks in advance for your replys

[Janm]

SME 7 Final gregswallow Contribs blocking emule and other p2p software


rpm -Uvh *.rpm
Preparing...                ########################################### [100%]
   1:ipp2p                  ########################################### [ 25%]
   2:e-smith-ipp2p          ########################################### [ 50%]
   3:kernel-module-ipp2p    ########################################### [ 75%]
   4:kernel-smp-module-ipp2p########################################### [100%]
/sbin/e-smith/config setprop masq
/sbin/e-smith/db dbfile setprop key prop1 val1 [prop2 val2] [prop3 val3] ...
/sbin/e-smith/config setprop masq ipp2p-ipp2p tcp
/sbin/e-smith/config setprop masq ipp2p-ares tcp
/sbin/e-smith/config setprop masq ipp2p-apple tcp
/sbin/e-smith/config setprop masq ipp2p-winmx tcp
/sbin/e-smith/config setprop masq ipp2p-soul tcp
/sbin/e-smith/config setprop masq ipp2p-bit tcp
/etc/rc7.d/S36masq restart

Shutting down IP masquerade and firewall rules:         Done!

Enabling IP masquerading: done
/sbin/e-smith/config show masq
masq=service
    DenylogTarget=drop
    Logging=none
    Stealth=no
    TCPMinimizeDelay=22
    Trace=disabled
    ipp2p-apple=tcp
    ipp2p-ares=tcp
    ipp2p-bit=tcp
    ipp2p-ipp2p=tcp
    ipp2p-soul=tcp
    ipp2p-winmx=tcp
    pptp=yes
    status=enabled
signal-event post-upgrade
signal-event reboot

Broadcast message from root (pts/0) (Sat Sep  2 12:40:17 2006):

The system is going down for reboot NOW!

Regards Jan

[gdbs]

you install the modul for smp and for i686??? why? you only have to install 1 of those... use uname -a to know which kernel you run...

[cool34000]

You could say it's a joke... No, it's a noob question...

I got that trying uname -a :

Code: [Select]

Linux sme 2.6.9-34.0.2.ELsmp #1 SMP Fri Jul 7 19:52:49 CDT 2006 i686 athlon i386 GNU/Linux

So, what am I ??? SMP, i386 or i686 ??? or maybe each one

[Janm]

uname -a
Linux www 2.6.9-34.0.2.ELsmp #1 SMP Fri Jul 7 19:52:49 CDT 2006 i686 i686 i386 GNU/Linux

Jan

[gdbs]

smp... but i386 and i686 compliant. that's why you can install i386 or i686 rpms.

But using smp rpms may be better for perfomances

someone to confirm this fact?

[Janm]

System Vital
Canonical Hostname sme.jm-data.dk
Listening IP 83.92.166.x
Kernel Version 2.6.9-34.0.2.ELsmp (SMP)
Distro Name  CentOS release 4.3 (Final) - SME Server 7.0
Uptime 58 minutes
Current Users 0
Load Averages 0.00 0.06 0.07

Network Usage
Device Received Sent Err/Drop
lo 1.14 MB 1.14 MB 0/0
bond0 0.00 KB 0.00 KB 0/0
eth0 1008.67 KB 7.56 MB 0/0
eth1 6.95 MB 827.14 KB 0/0
 
Hardware Information
Processors 2
Model Intel(R) Pentium(R) 4 CPU 3.00GHz
CPU Speed 2.99 GHz
Cache Size 2048 KB
System Bogomips 11975.82
PCI Devices 00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation 82801G
00:1f.1 IDE interface: Intel Corporation 82801G
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH
05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express
 
IDE Devices hda: HL-DT-STDVD-ROM GDR8164B
SCSI Devices ATA ST3250620AS (Direct-Access)
USB Devices Linux 2.6.9-34.0.2.ELsmp uhci_hcd UHCI Host Controller
Linux 2.6.9-34.0.2.ELsmp uhci_hcd UHCI Host Controller
Linux 2.6.9-34.0.2.ELsmp uhci_hcd UHCI Host Controller
Linux 2.6.9-34.0.2.ELsmp uhci_hcd UHCI Host Controller
Linux 2.6.9-34.0.2.ELsmp ehci_hcd EHCI Host Controller
 
 Memory Usage
Type Percent Capacity Free Used Size
Physical Memory   9%  2.25 GB 223.16 MB 2.47 GB
- Kernel + applications   4%    105.10 MB  
- Buffers   1%    25.88 MB  
- Cached   4%    92.19 MB  
Disk Swap   0%  1.94 GB 0.00 KB 1.94 GB
 
Mounted Filesystems
Mount Type Partition Percent Capacity Free Used Size
/ ext3 /dev/mapper/main-root  15% 181.92 GB 33.67 GB 227.13 GB
/dev/shm proc none  0% 1.23 GB 0.00 KB 1.23 GB
/dev/shm sysfs none  0% 1.23 GB 0.00 KB 1.23 GB
/dev/shm devpts none  0% 1.23 GB 0.00 KB 1.23 GB
/boot ext3 /dev/md1  19% 74.87 MB 18.69 MB 98.65 MB
/dev/shm tmpfs none  0% 1.23 GB 0.00 KB 1.23 GB
/dev/shm tmpfs none  0% 1.23 GB 0.00 KB 1.23 GB
Totals :    15% 183.23 GB 33.69 GB 228.46 GB

The System
Jan

[cool34000]

Thanks for your answer gdbs, now it's a bit clearer for me.

[gdbs]

Ok i've resolve my probleme... i didn't see that there's new kernel-module rpm for the last kernel update..........................  

Can someone told me the difference between le kernel-hugemem-module and the kernel-module rpm???

Thx

[jsk]

Hi,
I've installed ipp2p followed by howto but ipp2p doesn't work.
After command /etc/rc7.d/S36masq restart the server answer:

Shutting down IP masquerade and firewall rules:         Done!

Enabling IP masquerading: iptables v1.2.11: Unknown arg `-j'
Try `iptables -h' or 'iptables --help' for more information.
/etc/rc.d/init.d/masq: line 146: REDIRECT: command not found
iptables v1.2.11: Unknown arg `-j'
Try `iptables -h' or 'iptables --help' for more information.
/etc/rc.d/init.d/masq: line 148: REDIRECT: command not found
done

 Please help me to fix the problem.

Regards
John

[gregswallow]

Are you sure you didn't do something else to iptables?  There is no "-j" in the instructions for ipp2p.

This maybe?
http://www.google.com/search?q=site%3Acontribs.org+%22Unknown+arg+-j%22

BTW, for people that have the smeupdates-testing repo enabled, someone on the Centos-devel list is making ipp2p packages for that kernel (.42.0.2.EL).  The files are here:
http://homen.vsb.cz/~hrb33/el4/hrb/stable/i386/
(no i586, just i686)
This was his message to the list:
http://lists.centos.org/pipermail/centos-devel/2006-August/002393.html

[jsk]

Thanks for your reply Greg.

Are you sure you didn't do something else to iptables? There is no "-j" in the instructions for ipp2p.

This maybe?
http://www.google.com/search?q=site%3Acontribs.org+%22Unknown+arg+-j%22

KegRaider
Just make sure the longer lines are not split on to 2 lines. I think that was my problem before.

I put all in one line and server answer is:

/etc/rc7.d/S36masq restart
Shutting down IP masquerade and firewall rules:         Done!
Enabling IP masquerading: done

Best regards
John