I installed SME 6.0.1-01 on dual disks (software RAID1) using 2 Seagate Barracuda 300GB disks. I initially used Seagate's partition tool to make the disks usable.
SME created a 100MB /root, 512MB swap, and the rest as / (almost 300GB). All looked good. I just noticed, however, that I am down to 16GB available on the root partition.
df -k shows
[root@s01 root]# df -k
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/md1 32138888 14211044 16295244 47% /
/dev/md0 101018 13953 81849 15% /boot
none 515616 0 515616 0% /dev/shm
fdisk -l /dev/hda shows
[root@s01 files]# fdisk -l /dev/hda
Disk /dev/hda: 255 heads, 63 sectors, 4111 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 13 104391 fd Linux raid autodetect
/dev/hda2 14 4078 32652112+ fd Linux raid autodetect
/dev/hda3 4079 4111 265072+ fd Linux raid autodetect
fdisk -l /dev/hdb shows
[root@s01 files]# fdisk -l /dev/hdb
Disk /dev/hdb: 255 heads, 63 sectors, 36481 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 13 104391 fd Linux raid autodetect
/dev/hdb2 14 36448 292664137+ fd Linux raid autodetect
/dev/hdb3 36449 36481 265072+ fd Linux raid autodetect
Where did all my space go, and how can I reclaim it?
Thanks,
Jim