Koozali.org: home of the SME Server

will sme 7 run on these specs

Offline fixit

  • *
  • 216
  • +0/-0
    • http://www.fixitcomputers.com.au
will sme 7 run on these specs
« on: March 14, 2006, 04:13:43 PM »
I am looking at getting a proper server, but I want to use sme as the OS, would any of these two specs work with sme 7

AMD DUAL CORE SYSTEM (SINGLE CPU)
or AMD ATHLON 64 X2 3800
ASUS A8N VM-CSM S939
2 X SEAGATE 200GB SATA HDD
1GB DDR400 RAM
QUANTUM STT3401A-SST 20/40GB TAPE DRIVE
INTEGRATED DISPLAY
1 X GB NIC,
1 X 10/100 NIC

or
 
INTEL P4 650 3.4GHz LGA775
INTEL 915GAVL
2 X SEAGATE 200GB SATA HDD
1GB DDR 400 RAM
QUANTUM STT3401A-SST 20/40GB TAPE DRIVE
SERVER CASE
INTEGRATED DISPLAY
2 X 10/100 NIC

Thanks, Russell
.........

Offline lproven

  • *
  • 27
  • +0/-0
will sme 7 run on these specs
« Reply #1 on: March 14, 2006, 04:50:57 PM »
You may wish to give a bit more info.

Certainly, that's an abundant spec for a text-mode Linux such as SME.

From my experience, I'd recommend PATA disks over SATA ones. They're less hassle to set up.

You don't specify what kind of interface the tape drive will use to connect; that's significant.

Offline smeghead

  • *
  • 563
  • +0/-0
will sme 7 run on these specs
« Reply #2 on: March 14, 2006, 05:16:23 PM »
.. the tape drive model gives it away, the STT3401A-SST is an IDE Travan drive (SST - Travan, A - IDE).

Personally, I would forget the Travan drive and go for a nice SCSI DDS4 setup (new or s/h), more robust and tapes are cheaper; of course if you already have the drive and tapes you might as well use it.

HTH
..................

Offline fixit

  • *
  • 216
  • +0/-0
    • http://www.fixitcomputers.com.au
will sme 7 run on these specs
« Reply #3 on: March 15, 2006, 03:05:02 AM »
What I am mainly concerned about is SATA drives and a backup system

The system will be a web & email server + file server maybe even a vpn eventually, will have a heavy workload on the internal network.

Is SATA suitable on sme7?

Also, what would be recommended for backup system, i.e.; what brand

The less hassles the better, I am looking for a straightforward installation on a new system.

Has anyone used sme with dual core AMD or would dual p4 processors be a better option

Thanks, Russell
.........

Offline gordonr

  • *
  • 646
  • +0/-0
    • http://www.smeserver.com.au/
will sme 7 run on these specs
« Reply #4 on: March 15, 2006, 04:03:20 AM »
Quote from: "lproven"

From my experience, I'd recommend PATA disks over SATA ones. They're less hassle to set up.

SATA works out of the box in SME7 either as single disks or RAID sets.
............

Offline fixit

  • *
  • 216
  • +0/-0
    • http://www.fixitcomputers.com.au
will sme 7 run on these specs
« Reply #5 on: March 15, 2006, 07:00:32 AM »
I'm thinking about going with SATA, only because of price. To purchase a server with SCSI is a more expensive option and cost 3 times the price.

What is the problem with SATA, is it really that bad

What about AMD's Dual Core Processor?? Not Daul Processors.

And a recommendation for Tape Backup, what brand does sme 7 like
.........

Offline gordonr

  • *
  • 646
  • +0/-0
    • http://www.smeserver.com.au/
will sme 7 run on these specs
« Reply #6 on: March 15, 2006, 07:15:00 AM »
Quote from: "fixit"
I'm thinking about going with SATA, only because of price. To purchase a server with SCSI is a more expensive option and cost 3 times the price.

What is the problem with SATA, is it really that bad


SATA is excellent, much faster than PATA and an equal of SCSI for most systems. SCSI may still have the edge on large, database intensive apps, but I would be surprised if you see any performance issues with SATA.

Avoid the cheap SATA "fakeraid" RAID cards. Either buy a decent one (e.g. Adaptec) which makes the disks appear as a single disk to Linux, or let Linux do software RAID. It does that well - faster and more robustly than many cheap SATA 'fakeraid" cards.

http://linuxmafia.com/faq/Hardware/sata.html

Quote from: "fixit"

What about AMD's Dual Core Processor?? Not Daul Processors.

I haven't tried one, but it should work. Why don't you try one and report? It's almost certainly overkill for most server uses. Heavy (and I mean heavy) webmail use might make it worthwhile, but most modern CPUs have plenty of horsepower.

Quote from: "fixit"

And a recommendation for Tape Backup, what brand does sme 7 like

Pretty much any SCSI tape should work "out of the box".

IDE tape drives may work, using ide-scsi emulation (see bug 788).

I haven't heard reports either way of SATA tape drives. They should work just like SCSI tape drives.

Floppy tape drives - just say no (I don't think they even work under the 2.6 kernel, but say no anyway).
............

Offline smeusr

  • ***
  • 74
  • +0/-0
Re: will sme 7 run on these specs
« Reply #7 on: September 27, 2007, 11:22:58 AM »
I am looking at getting a proper server, but I want to use sme as the OS, would any of these two specs work with sme 7

AMD DUAL CORE SYSTEM (SINGLE CPU)
or AMD ATHLON 64 X2 3800
ASUS A8N VM-CSM S939
2 X SEAGATE 200GB SATA HDD
1GB DDR400 RAM
QUANTUM STT3401A-SST 20/40GB TAPE DRIVE
INTEGRATED DISPLAY
1 X GB NIC,
1 X 10/100 NIC

Hi, I'm trying to get my A8N board working and it's giving me a lot of trouble.  SME doesn't support the Marvel lan adapter out of the box.  I disabled it and put 2 10/100 d-link nics on there.  The nics are unstable.  I can't get one of the nics to register.  It'll showup in the Configuration panel and it would connect to the internet but then it would fail and I would loose connection.  Has anyone experienced this?

 

Offline judgej

  • *
  • 375
  • +0/-0
Re: will sme 7 run on these specs
« Reply #8 on: September 27, 2007, 05:14:15 PM »
Certainly, that's an abundant spec for a text-mode Linux such as SME.

Text mode? Service-mode, more like, considering you don't even need a monitor connected ;-)
-- Jason

Offline p-jones

  • *
  • 594
  • +0/-0
Re: will sme 7 run on these specs
« Reply #9 on: September 28, 2007, 01:58:14 PM »
From my experiences, I think you will do better all round with the Intel 775 Box.

I wondered about AMD Dual Core and had the opportunity to run up a copy of 7.2 on a Foxconn board the other day. It loaded and setup just fine in server only mode but I didnt have the time to thrash it. It certainly didnt seem to be super fast tho.  Not as fast as the 2.0GHz Intel Core 2 Duo Skt 775 with 2 X 160Gb SATA drives I played with a few weeks earlier. Each had 1Gb DDR2 RAM

I used server only mode because I didnt have the time to shag about adding a second NIC. It did not have the Marvelan Lan card mentioned above so no issues.

A bit subjective but hope it helps.
...

Offline nicolasdiogo

  • *
  • 22
  • +0/-0
Re: will sme 7 run on these specs
« Reply #10 on: September 28, 2007, 02:20:13 PM »
hi,

i am running mine on a spare kit made up of:

AMD X2 3800 (socket 939)

mb: asus a8n-e

hd: two IDE seagate

ram: 2 gb

i have installed the i586 image on top and it is very good.
and will be installing VMWARE to support other services.