Topic: Login Problems

[BeeKeeper]

I have just set up a SME 7.0rc02 server and configured it. I had not entered any Usernames or Password during this but now when I reboot, it asks me for a fileserver login and a password.

What do I enter here as I have not set either during setting the server up.

BIll

[dsemuk]

Didn't it ask for you admin password during the setup?

Dave

[Mangetout]

I'm about 94% certain that, although you are asked for various configuration details during installation, it doesn't ask you to define the admin/root password until after the first post-install (automatic) reboot.  Are you sure it wasn't asking you to define the password?

[byte]

Once installed it asks you to reboot, upon first loading it comes to bootstrap and first screen is to set your root/admin password it then ask's you to confirm password...have you seen that?

[JonB]

Have you read the manual ??

What you are seeing is the console logon.

To configure the server further you need to access the server-manager from a PC on the LAN by going to http://ip.address.of.server/server-manager or just http://www/server-manager

You will need to log in with the username admin and the password you set up when you first configured the server.

But please read the manual first.

Jon

[BeeKeeper]

Thanks for all of your help. the problem was I wasn't using the word admin as the user name. I looked through the manual and couldn't find reference to that. Everything is OK now and thanks to everyone for being so patient and helpfull.
Bill