I recently installed SME 7. It is just about to be put in production but in checking the system, it appears RAID is not working. I installed two brandnew identical 200 gb drives, both as master. But raidmonitor only shows one. How can I enable the other drive? I read this should be automatic as part of the install, but it doesn't appear to be. Here is the output of the raidmonitor report:
...................
RAID Monitor Report
...................
Current /proc/mdstat saved in /root/raidmonitor/mdstat:
Personalities : [raid1]
md1 : active raid1 hda1[0] hdb1[1]
104320 blocks [2/2] [UU]
md2 : active raid1 hda2[0] hdb2[1]
195253888 blocks [2/2] [UU]
unused devices: <none>
Current partition info saved in /root/raidmonitor/sfdisk.out:
# partition table of /dev/hda
unit: sectors
/dev/hda1 : start= 63, size= 208782, Id=fd, bootable
/dev/hda2 : start= 208845, size=390508020, Id=fd
/dev/hda3 : start= 0, size= 0, Id= 0
/dev/hda4 : start= 0, size= 0, Id= 0
Current /etc/lilo.conf saved in /root/raidmonitor/lilo.conf:
Reloading cron daemon configuration: [ OK ]
Current cron entry is:
*/15 * * * * root /usr/local/bin/raidmonitor -v
1 Replies
1195 Views