Topic: update to Mysql/PHP5 script not working

[mike_mattos]

the how_to seems to fail at

# yum --enablerepo=centosplus update php

==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Setting up Update Process
Setting up repositories
Reading repository metadata in from local files
Could not find update match for php
No Packages marked for Update/Obsoletion
================================================================
No new rpms were installed. No additional commands are required.
================================================================


The result seems to be no php on the system, MySql5 works.

I repeated this on a fresh install

[william_syd]

Works for me.

Code: [Select]

[root@c3 ~]# yum --enablerepo=centosplus update php
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Setting up Update Process
Setting up repositories
Reading repository metadata in from local files
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package php.i386 0:5.0.4-5.centos4 set to be updated
--> Running transaction check
--> Processing Dependency: php = 4.3.9-3.12 for package: php-mysql
--> Processing Dependency: php = 4.3.9-3.12 for package: php-pear
--> Processing Dependency: php = 4.3.9-3.12 for package: php-ldap
--> Processing Dependency: php = 4.3.9-3.12 for package: php-imap
--> Processing Dependency: php = 4.3.9-3.12 for package: php-mbstring
--> Processing Dependency: php = 4.3.9-3.12 for package: php-gd
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Package php-imap.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-pear.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-ldap.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-mysql.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-gd.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-mbstring.i386 0:5.0.4-5.centos4 set to be updated
--> Running transaction check

Dependencies Resolved

=============================================================================
 Package                 Arch       Version          Repository        Size
=============================================================================
Updating:
 php                     i386       5.0.4-5.centos4  centosplus        2.3 M
Updating for dependencies:
 php-gd                  i386       5.0.4-5.centos4  centosplus         96 k
 php-imap                i386       5.0.4-5.centos4  centosplus         44 k
 php-ldap                i386       5.0.4-5.centos4  centosplus         28 k
 php-mbstring            i386       5.0.4-5.centos4  centosplus        962 k
 php-mysql               i386       5.0.4-5.centos4  centosplus         58 k
 php-pear                i386       5.0.4-5.centos4  centosplus        359 k

Transaction Summary
=============================================================================
Install      0 Package(s)
Update       7 Package(s)
Remove       0 Package(s)
Total download size: 3.8 M
Is this ok [y/N]:


[mike_mattos]

Did you run the entire script including the command

rpm -e --nodeps php-domxml

and perform the mysql update?

The update failed on a test machine, and again on a brand new sme7 install!

[mike_mattos]

I reinstalled SME on the drives, installed PHP as the SECOND line of the script, and despite a few errors reported at the httpd restart , all worked propertly after a reboot!

Thanks, William

[william_syd]

Did you run the entire script including the command

rpm -e --nodeps php-domxml

If php-domxml is not removed then yum will not proceed.

Code: [Select]

[root@c3 ~]# yum --enablerepo=centosplus update php
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Setting up Update Process
Setting up repositories
Reading repository metadata in from local files
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package php.i386 0:5.0.4-5.centos4 set to be updated
--> Running transaction check
--> Processing Dependency: php = 4.3.9-3.12 for package: php-mysql
--> Processing Dependency: php = 4.3.9-3.15 for package: php-domxml
--> Processing Dependency: php = 4.3.9-3.12 for package: php-pear
--> Processing Dependency: php = 4.3.9-3.12 for package: php-ldap
--> Processing Dependency: php = 4.3.9-3.12 for package: php-imap
--> Processing Dependency: php = 4.3.9-3.12 for package: php-mbstring
--> Processing Dependency: php = 4.3.9-3.12 for package: php-gd
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Package php-imap.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-pear.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-ldap.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-mysql.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-xml.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-gd.i386 0:5.0.4-5.centos4 set to be updated
---> Package php-mbstring.i386 0:5.0.4-5.centos4 set to be updated
--> Running transaction check
--> Processing Dependency: php-domxml for package: e-smith-horde
--> Finished Dependency Resolution
Error: Missing Dependency: php-domxml is needed by package e-smith-horde
================================================================
No new rpms were installed. No additional commands are required.
================================================================
[root@c3 ~]#


and perform the mysql update?

No, I selected no and did not proceed. However it did show yum getting further than your original post.

installed PHP as the SECOND line of the script

Please explain.

and despite a few errors reported at the httpd restart

There should be no errors. Would you like to detail what they were ?

[mike_mattos]

The httpd restart gave a "failed" response, I suspected that the restart command needed 'supervise' in the path.  The system seemed to be OK on reboot.

My terminal history doesn't go far enough back to see if the other dialog was significant , phpMyAdmin filled the history with chatter about
 /usr/share/mysql/mysql_fix_privilege_tables.sql


I'm updating another system this week, I'll record the dialog this time!


thx

MIke

[Mark F]

I get the same problem. Follow the howto, but gets to the PHP bit and:

Code: [Select]

==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Loading "fastestmirror" plugin
Loading "smeserver" plugin
Setting up Update Process
Setting up repositories
smeaddons                 100% |=========================|  951 B    00:00
centosplus                100% |=========================|  951 B    00:00
smeos                     100% |=========================|  951 B    00:00
smeupdates                100% |=========================|  951 B    00:00
Loading mirror speeds from cached hostfile
Reading repository metadata in from local files
primary.xml.gz            100% |=========================|  54 kB    00:00
http://mirror.contribs.org/smeserver/releases/7/smeupdates/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
Trying other mirror.
primary.xml.gz            100% |=========================|  54 kB    00:00
http://mirror.contribs.org/smeserver/releases/7/smeupdates/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
Trying other mirror.
primary.xml.gz            100% |=========================|  54 kB    00:00
http://mirror.contribs.org/smeserver/releases/7/smeupdates/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
Trying other mirror.
primary.xml.gz            100% |=========================|  54 kB    00:00
http://mirror.contribs.org/smeserver/releases/7/smeupdates/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksumTrying other mirror.
primary.xml.gz            100% |=========================|  54 kB    00:01
smeupdates: ################################################## 91/91
Added 1 new packages, deleted 0 old in 1.36 seconds
Could not find update match for php
No Packages marked for Update/Obsoletion
================================================================
No new rpms were installed. No additional commands are required.
================================================================


Hope this helps

[william_syd]

I don't think the howto is still required.

EDIT: Disregard the above. I've lost server-manager.

Put your system back to normal - reinstall php-domxml if you have to.

Do

Code: [Select]

yum --enablerepo=smeupdates-testing update e-smith-phpThen do

Code: [Select]

yum update followed by

Code: [Select]

yum --enablerepo=base --enablerepo=updates --enablerepo=centosplus update php mysql

For me I get...

Code: [Select]

Dependencies Resolved

=============================================================================
 Package                 Arch       Version          Repository        Size
=============================================================================
Installing:
 php-xml                 i386       5.0.4-5.centos4  centosplus         64 k
     replacing  php-domxml.i386 4.3.9-3.15

Updating:
 mysql                   i386       5.0.22-1.centos.1  centosplus        3.0 M
 php                     i386       5.1.6-1.2.1.centos  centosplus        3.3 M
Installing for dependencies:
 mysqlclient14           i386       4.1.14-4.2.c4.1  centosplus        1.1 M
 php-pdo                 i386       5.1.6-1.2.1.centos  centosplus         60 k
 php-xml                 i386       5.1.6-1.2.1.centos  centosplus         83 k
Updating for dependencies:
 mysql-server            i386       5.0.22-1.centos.1  centosplus        9.7 M
 php-gd                  i386       5.1.6-1.2.1.centos  centosplus        101 k
 php-imap                i386       5.1.6-1.2.1.centos  centosplus         47 k
 php-ldap                i386       5.1.6-1.2.1.centos  centosplus         30 k
 php-mbstring            i386       5.1.6-1.2.1.centos  centosplus        968 k
 php-mysql               i386       5.1.6-1.2.1.centos  centosplus         75 k
 php-pear                noarch     1:1.4.9-1.2.centos  centosplus        342 k

Transaction Summary
=============================================================================
Install      4 Package(s)
Update       9 Package(s)
Remove       0 Package(s)
Total download size: 19 M


More info..
http://bugs.contribs.org/show_bug.cgi?id=1120