Topic: help please, connect to my local lan with 5.1.2

[Ronald Tanis]

i have installed e-smith 5.1.2 with two nics

first interface 10.10.10.160 connect to my local lan
second interface 192.168.1.10 with default gateway 192.168.1.1 connect to my adsl router


My internet works fine, but i want to connect from another isp to my static ip number xxx.xxx.xxx.xxx

How can i do that,I have made forwards in my router to my 192.168.1.10 number , but i can't connect
my webserver and my local ip-number 10.10.10.160

HAVE ANYONE SUGGESTIONS HOW I CAN SOLVE THIS PROBLEM
   
With regards and thanks for your time,
Ronald Tanis

[Jacksta]

I may be mis-reading your question so this is a long shot, make sure on your client / desktop machines you have the following allocated under TCP/IP......
IP address and Subnet mask, Gateway address and DNS address (which should be the same as your Gateway address). Worth a try as it works here.

Regards
Jacksta

[Jacksta]

I may be mis-reading your question, so its a long shot.
Try the following on your desktop machines - under TCP/IP set static addressing and ensure the following
Set IP address and Subnet mask, Gateway address and then also set DNS address (which is the same as your gateway address) It should now work.

Regards
Jacksta

[Ronald Tanis]

my internet from my client pc's on my local lan works fine, connect to my webserver on my local lan also works fine, but i want to connect to my webserver from the internet. I have a static IP-adres i want to use, but when i connect i get no connection.

I have made forwards in my router 192.168.1.1 that port 80 will forward to 192.168.1.10. (my second nic in my e-smith server).

with regards