Topic: SAIL 2.2.1 - Inbound and out bound fail.

[llandry]

OK folks,

Weird one going on here...

I was running 2.2.1 - 545 just fine until last Thursday.... Nothing has changed, but my inbound and outbound calls started to fail... I also have 2 sailtosail trunks, and those failed as well with a "busy" signal... Fine, I'll cycle asterisk and all will be fine.... Not...

OK, so I took the opportunity to upgrade to 565... Same thing... My configs haven't changed...

Here's what the inbound log looks like.. (I'm not to asterisk savy, so I'm not sure whats going on, the call comes in, but then hangs up... )

Any incite would be greatly appreciated... If you need more info, please point me in the right direction and I'll gladly provide it.

Thanks in advance.


    -- Accepting UNAUTHENTICATED call from 206.191.37.138:
       > requested format = ulaw,
       > requested prefs = (ulaw|gsm),
       > actual format = gsm,
       > host prefs = (g729|gsm|ulaw|alaw),
       > priority = mine
    -- Executing [6477236652@mainmenu:1] AGI("IAX2/6477236652-7", "selintra|Inbound|6477236652") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/selintra
    -- AGI Script selintra completed, returning 0
  == Auto fallthrough, channel 'IAX2/6477236652-7' status is 'UNKNOWN'
    -- Executing [h@mainmenu:1] Hangup("IAX2/6477236652-7", "") in new stack
  == Spawn extension (mainmenu, h, 1) exited non-zero on 'IAX2/6477236652-7'
    -- Hungup 'IAX2/6477236652-7'
[Nov 26 22:54:22] NOTICE[14914]: cdr.c:434 ast_cdr_free: CDR on channel 'IAX2/6477236652-7' not posted

[SARK devs]

Cool

Not seen one like this before.  Can you run it again with agi debug?... log in to asterisk and do a hard stop....   

CLI> stop now

Then start asterisk as a console task

asterisk -vvvvc
agi debug

run your call

agi no debug
asterisk stop
asterisk

post the output here.

Best

S

[llandry]

Selintra...

Problem solved... don't know why it worked before, but....

As I ran the instruction to get the AGI debug log, everything started to work... outbound calls, inbound calls, call between my 3 switches.... Everyhting worked as it should...

I exited the CLI, and procedded to restart asterisk as a service

service asterisk start

Calls failed again... So I stop the service and just ran "asterisk" and everything works...

I must say that I used to have a 2.1.15 installation before, but followed the 2.2.1 installation instructions to the letter... It worked fine for a couple of weeks and then this...  I must have gremlins...

Anyhoo.... thanks for the help, I'm back up again, but I would like to know why it won't work as before ie, as a service.

L2

[SARK devs]

Ah ok.

Humour me and do

ls /etc/init.d

then do

config show asterisk

and

config show sark

let me see the output.

Best

S

[llandry]

Here we go...

Code: [Select]

[root@piglet ~]# ls /etc/init.d
acpid              haldaemon       netplugd            smbd
anacron            halt            network             sme7admind
AnotherShaper      httpd           nmbd                smtp-auth-proxy
apmd               httpd-admin     ntop                snmpd
asterisk           httpd-e-smith   ntpd                snmptrapd
atalk              identd          nut                 spamassassin
atd                imap            oidentd             spamd
auditd             imaps           pcmcia              sqpsmtpd
bootstrap-console  iptables        pop3                squid
cbq.sh             iptables-trace  pop3s               sshd
clamd              irqbalance      pptpd               SuperShaper
cpuspeed           isdn            proftpd             supervise
crond              keytable        psacct              syslog
daemontools        killall         qmail               sysstat
dansguardian       kudzu           qpsmtpd             tftp
dc_client          ldap            qpsmtpd-forkserver  tinydns
dc_server          lm_sensors      radiusd             ulogd
dhcpd              local           raidmonitor         ups
dhcrelay           lpd             ramdisk             voipshaper
diald              masq            rawdevices          wan
dnscache           mdmonitor       readahead           winbind
dovecot            mdmpd           readahead_early     wshaper
e-smith-service    messagebus      sark                xinetd
fop                microcode_ctl   saslauthd           yum
freshclam          mysqld          single              zaptel
functions          mysql.init      smartd
gpm                netfs           smb
[root@piglet ~]#
[root@piglet ~]# config show asterisk
asterisk=service
    UDPPorts=4569,5060,10000:20000
    status=enabled
[root@piglet ~]#
[root@piglet ~]# config show sark
sark=service
    UDPPorts=4569,5060,10000:20000
    status=enabled
[root@piglet ~]#[tt][/tt]



[SARK devs]

do service start sark (or better yet, /etc/init.d/sark start)

That should work correctly and load the correct drivers for you.

service start asterisk won't work properly with 2.2

if it does then you should disable the asterisk daemon with

config setprop sark status disabled

Best

S

[llandry]

Thanks Much....

As always, Selintra come through

L2

[SARK devs]

oops error in last post

disable the asterisk daemon with

config setprop asterisk status disable

That way, only the sark daemon will run.


Sorry