Hi Jeff
Did not redo the hardware detection and all has been working. Should we have reset again?
That would be why in the genconf section it has gone back to "lc_country uk" where as the system.conf is showing
loadzone = au
defaultzone = au
Notice the 3rd 7 4th ports are ls and the 1st-2nd ks. Under zap they were all ks.
; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER)
;;; line="1 WCTDM/4/0 FXSKS (In use) (EC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=2
context=mainmenu
channel => 1
callerid=
group=
context=default
;;; line="2 WCTDM/4/1 FXSKS (In use) (EC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=2
context=mainmenu
channel => 2
callerid=
group=
context=default
;;; line="3 WCTDM/4/2 FXOKS (In use) (EC: MG2)"
signalling=fxo_ls
callerid="Channel 3" <4003>
mailbox=4003
group=1
context=internal
channel => 3
callerid=
mailbox=
group=
context=default
;;; line="4 WCTDM/4/3 FXOKS (In use) (EC: MG2)"
signalling=fxo_ls
callerid="Channel 4" <4004>
mailbox=4004
group=1
context=internal
channel => 4
callerid=
mailbox=
group=
context=default