Hi
For a long time I tryed to get lmsensors to work on my EPIA Ezra motherboard (came from a Falcon CR-51 box). Never went thru the
modprobe vt8231 because it's not found.
Allways see written that newer kernels should support it... and my SME never find vt8231 module to load and his kernel never had support to it.
Today I was looking at phpSysInfo (I used to have it installed on SME5.6 before SysMon became my preferred) and see
william_syd showing demo for 3 versions.
So I decide to reinstall phpSysInfo and get surprised because it reports:
Hardware Information
Processors 1
Model VIA Ezra @ 32°C
CPU Speed 933.45 Mhz
Cache Size 64.00 KB
System Bogomips 1867.97Please note it's showing my
Mobo Temperature! How it know it ??
william_syd: We have Via EZRA motherboards who will not be able to install SME8!!!
BTW:I installed a 4+1USB 2.0 PCI card on mine!
Here is my complete
Hardware section:
Hardware Information
Processors 1
Model VIA Ezra @ 32°C
CPU Speed 933.45 Mhz
Cache Size 64.00 KB
System Bogomips 1867.97
PCI Devices
- Bridge: VIA Technologies, Inc. VT8235 ACPI
- Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
- Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia]
- IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
- ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge]
- PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
- USB Controller: VIA Technologies, Inc. USB 2.0
- (4x) USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
- VGA compatible controller: Trident Microsystems CyberBlade/i1
IDE Devices
- hda: WDC WD5000AAJB-14UHA0 (Capacity: 465.76 GB)
SCSI Devices none
USB Devices
-
SGS Thomson Microelectronics 56k SoftModemThe SoftModem is another one I'm trying to get work on SME... to use to have a hylafax server! Any tip/help is welcome!
0 Replies
953 Views