We have made rpm for Sme, install notes here:
http://smeserver.nethesis.it/sogo/
Your Comments Are Appreciated
I ran into a problem using this rpm which hasn't been reported to this thread; so here goes...
I ran the install on my SME 8b5, Server only machine following your howto and solving the various glitches as I went along. I finished up with an install that didn't work properly. I could raise the SOGo login screen with
http://hostname/SOGo and, using a valid username/password combination, the system plainly authenticated the user because the URL changed to
https://hostname.domain/SOGo/so/username/Mail, but the system did not display the page.
I then reasoned that the URL was incorrect for my install, so I changed the URL to "
https://hostname/SOGo/so/username/Mail/View" and up came the correct screen. Most of the functionality of SOGo worked but logging out and then logging back in didn't work and changing the URL back to the one with no domain name did not produce the correct screen until the workstation had been logged out and back in.
It is pretty obvious that the rpm does not produce a working SOGo system on a 'Server only' SME machine so I added a second network card to my server and reconfigured it as a Dedicated Server and Gateway. Once that was complete the unchanged SOGo install began working perfectly using
http://hostname.doman-name/SOGo or
https://hostame.domain-name/SOGo as the calling URL.
These problems may be caused by the fact that the 'Server-only' install was not the DHCP master for the network or it may be that the rpm is not sufficiently explicit in setting the hostname and domain name information in the configuration files.
Since I now know that the rpm works fine - with a couple of glitches that need modifications to the instructions - I'd be happy to settle for the fact that it works perfectly on a Server and Gateway.
I'll publish a complete Howto shortly including all of the extra steps needed to make it work.
Ed Form