Topic: I need to share this dir

[tviles]

Sorry I just need some help so that I can make this visible on the network. If you need more just tell me what commands to enter and I will reply back. Thanks Tracy I tried to follow along the add disk procedure but I must have missed something.

[root@shpdserver police]# ls -l /mnt/hill/ibays/police
total 1768
drwxrwxr-x   2 admin admin    4096 Apr 23  2009 2009 KS Traffic Safety Conference Videos
drwxrwxr-x   2 admin admin    4096 Oct 15  2007 cgi-bin
drwxrwxr-x   3 admin admin    4096 Dec  1  2008 Cty_Server
drwxrwxr-x  58 admin admin    4096 Oct 29 11:33 files
drwxrwxr-x   2 admin admin    4096 Sep 28  2008 html
-rwxrwxr-x   1 admin admin   56832 Oct 26 14:47 Juvenile Submission Checklist.doc
-rwxrwxr-x   1 admin admin 1723392 Dec  5  2009 KLER Department Training 2009.ppt
[root@shpdserver police]#

[Jáder]

Hi

If you NEED this exact directory to be shared, search for smb.conf  on google, an create a template to share it.

I´d like to suggest you to create an ibay and put the conten there...inside files or html (depends how it will be accessed) but I´m not sure why you need to share THIS directory.
Could you explain ?

Regards
Jáder

[tviles]

Server crashed due to bad scsi drives running SME software. All the data was being stored on this 1TB sata drive sitting in belly of server and it is still good. The 1TB drive was a symlink'd ibay before crash. Have reloaded SME after replacing bad drives. I can see this data on the 1TB and if I could share it out I could map the users to it so they could continue working.

[tviles]

I can't create a ibay on the newly installed SME server that would hold enough data. It runs on the older 36 gig scsi's. The 1 TB has about 200 gig of data on it.

[tviles]

I have created an ibay called police and trying to symlink it to the folder on the 1tb.

[Stefano]

I have created an ibay called police and trying to symlink it to the folder on the 1tb.

create the ibay.. let's say its name is police

then edit your /etc/fstab file and ad a line like this

Code: [Select]

/dev/sdX1                /home/e-smith/files/ibays/police/files                   ext3    defaults        0 0

where sdX1 is the right disk and partition

save and reboot your server

when it's up & running, open server-manager, edit that ibay (i.e. change the owner group) and save.. then repeat the action resetting the right group

done
HTH

[tviles]

This is what I have in the fstab file now.
I added the sda1 line and server does reboot fine with this.
Let me reread your last post again and thanks for the help.

#------------------------------------------------------------
# BE CAREFUL WHEN MODIFYING THIS FILE! It is updated automatically
# by the SME server software. A few entries are updated during
# the template processing of the file and white space is removed,
# but otherwise changes to the file are preserved.
# For more information, see http://www.e-smith.org/custom/ and
# the template fragments in /etc/e-smith/templates/etc/fstab/.
#
# copyright (C) 2002 Mitel Networks Corporation
#------------------------------------------------------------
# This file is edited by fstab-sync - see 'man fstab-sync' for details
/dev/main/root          /                       ext3    usrquota,grpquota        1 1
/dev/md1                /boot                   ext3    defaults        1 2
none                    /dev/pts                devpts  gid=5,mode=620  0 0
none                    /dev/shm                tmpfs   defaults        0 0
none                    /proc                   proc    defaults        0 0
none                    /sys                    sysfs   defaults        0 0
/dev/main/swap          swap                    swap    defaults        0 0
/dev/sda1 /mnt/hill ext3 usrquota,grpquota 1 2
/dev/hda                /media/cdrom            auto    pamconsole,exec,noauto,managed 0 0
/dev/fd0                /media/floppy           auto    pamconsole,exec,noauto,managed 0 0

[Stefano]

you did not add the line as I suggested, it will not work as you wish..

[tviles]

Rebooting now.

#------------------------------------------------------------
# BE CAREFUL WHEN MODIFYING THIS FILE! It is updated automatically
# by the SME server software. A few entries are updated during
# the template processing of the file and white space is removed,
# but otherwise changes to the file are preserved.
# For more information, see http://www.e-smith.org/custom/ and
# the template fragments in /etc/e-smith/templates/etc/fstab/.
#
# copyright (C) 2002 Mitel Networks Corporation
#------------------------------------------------------------
# This file is edited by fstab-sync - see 'man fstab-sync' for details
/dev/main/root          /                       ext3    usrquota,grpquota        1 1
/dev/md1                /boot                   ext3    defaults        1 2
none                    /dev/pts                devpts  gid=5,mode=620  0 0
none                    /dev/shm                tmpfs   defaults        0 0
none                    /proc                   proc    defaults        0 0
none                    /sys                    sysfs   defaults        0 0
/dev/main/swap          swap                    swap    defaults        0 0
/dev/sda1 /home/e-smith/files/ibays/police/files ext3 defaults 0 0
/dev/hda                /media/cdrom            auto    pamconsole,exec,noauto,managed 0 0
/dev/fd0                /media/floppy           auto    pamconsole,exec,noauto,managed 0 0

[tviles]

Stefano I love you! Thanks so much. Now I can start getting the desktop reconnected to the domain.

[Stefano]

Stefano I love you!

if you are not a woman, sorry, I'm not bisex

you're welcome

[Igi2003]

if you are not a woman, sorry, I'm not bisex

you're welcome

[CharlieBrady]

/dev/sda1 /mnt/hill ext3 usrquota,grpquota 1 2
/dev/hda                /media/cdrom            auto    pamconsole,exec,noauto,managed 0 0

This is rather unusual. Your raid system apparently does not include /dev/sda and does not include /dev/hda. What does:

cat /proc/mdstat

show?

[tviles]

Go ahead and tell me even if it is bad.
sda is a sata 1tb on a pci to sata card.

[root@shpdserver ~]# cat /proc/mdstat
Personalities : [raid1] [raid5]
md2 : active raid5 sdb2[0] sdf2[4] sde2[3] sdd2[2] sdc2[1]
      141820928 blocks level 5, 256k chunk, algorithm 2 [5/5] [UUUUU]

md1 : active raid1 sdb1[0] sdf1[4] sde1[3] sdd1[2] sdc1[1]
      104320 blocks [5/5] [UUUUU]

unused devices: <none>
[root@shpdserver ~]#

[tviles]

sda was not part of the raid before the crash it was a symlink ibay for shared data. When I reloaded the sme server software I left sda unplugged.

See how I have now plugged sdg back in now? It is the last backup. It is an external 1TB usb hard drive. I believe the data on there was over a week old. It (sdg) does (should) contain the private networked drives (users) information I believe. I would like to access that but not sure if I can create an ibay like I did with sda so that I could pick and choose from it. Example is if I setup a user called shpd15 he can see on his desktop a shared ibay (police) and a private network drive called shpd15. Most users never put any data into the private network drive called shpd15 but some did. I'm sure some of them will ask for that data soon. Although sdg is plugged in I do not have any backup's scheduled yet so as to not overwrite data on sdg. 

[root@shpdserver ~]# fdisk -l|more
Disk /dev/md1 doesn't contain a valid partition table
Disk /dev/md2 doesn't contain a valid partition table
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1 doesn't contain a valid partition table

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1      121601   976760001   83  Linux

Disk /dev/sdb: 36.4 GB, 36420075008 bytes
255 heads, 63 sectors/track, 4427 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1          13      104391   fd  Linux raid autodetect
/dev/sdb2              14        4427    35455455   fd  Linux raid autodetect

Disk /dev/sdc: 36.4 GB, 36420075008 bytes
255 heads, 63 sectors/track, 4427 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           1          13      104391   fd  Linux raid autodetect
/dev/sdc2              14        4427    35455455   fd  Linux raid autodetect

Disk /dev/sdd: 36.4 GB, 36420075008 bytes
255 heads, 63 sectors/track, 4427 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1   *           1          13      104391   fd  Linux raid autodetect
/dev/sdd2              14        4427    35455455   fd  Linux raid autodetect

Disk /dev/sde: 36.4 GB, 36420075008 bytes
255 heads, 63 sectors/track, 4427 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sde1   *           1          13      104391   fd  Linux raid autodetect
/dev/sde2              14        4427    35455455   fd  Linux raid autodetect

Disk /dev/sdf: 73.5 GB, 73543163904 bytes
255 heads, 63 sectors/track, 8941 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdf1   *           1          13      104391   fd  Linux raid autodetect
/dev/sdf2              14        8941    71714160   fd  Linux raid autodetect

Disk /dev/md1: 106 MB, 106823680 bytes
2 heads, 4 sectors/track, 26080 cylinders
Units = cylinders of 8 * 512 = 4096 bytes


Disk /dev/md2: 145.2 GB, 145224630272 bytes
2 heads, 4 sectors/track, 35455232 cylinders
Units = cylinders of 8 * 512 = 4096 bytes


Disk /dev/dm-0: 143.0 GB, 143076098048 bytes
2 heads, 4 sectors/track, 34930688 cylinders
Units = cylinders of 8 * 512 = 4096 bytes


Disk /dev/dm-1: 2080 MB, 2080374784 bytes
2 heads, 4 sectors/track, 507904 cylinders
Units = cylinders of 8 * 512 = 4096 bytes


Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdg1               1      121601   976760001    c  W95 FAT32 (LBA)
[root@shpdserver ~]#

[tviles]

[root@shpdserver ~]# df -T
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/mapper/main-root
              ext3   137530456   2159216 128385104   2% /
/dev/md1      ext3      101018     23812     71990  25% /boot
none         tmpfs     1037428         0   1037428   0% /dev/shm
/dev/sda1     ext3   961432072 156054112 756539960  18% /home/e-smith/files/ibays/police/files
[root@shpdserver ~]#