Can't connect via SSH, even with public access

Matthias J. Lang

Can't connect via SSH, even with public access

« on: July 06, 2002, 10:45:24 PM »

Hi folks!
I really have a big problem:
I have installed an e-smith server and connect the box with my local net (IP:192.168.0.2; MASK:255.255.255.0) and with our provider using a nic, too. This NIC has IP 195.30.22.23 and MASK 255.255.255.224. If I configure the box, it asks for a gateway (IP:195.30.22.1 MASK:255.255.255.224) and it tell it to the box. Now everything seems to be well, but I can't connect via SSH from outside local network (form inside its all ok). What setting has to be chnaged to do so? The Remote Access setting is always set to PUBLIC. If I want to access another server with SuSE Linux. there isn't any problem.
Please HELP!

Matthias

Logged

Eric

Re: Can't connect via SSH, even with public access

« Reply #1 on: December 14, 2003, 08:29:53 PM »

I've got the same issue. Any solutions?

Logged

Ron

Re: Can't connect via SSH, even with public access

« Reply #2 on: December 14, 2003, 09:54:32 PM »

In your server-manager console under remote management :

Remote Management
It is possible to allow hosts on remote networks to access the server manager by entering those networks here. Use a subnet mask of 255.255.255.255 to limit the access to the specified host. Any hosts within the specified range will be able to access the server manager using HTTPS.

Thatmight work for you.

[%sig%]

Logged