Topic: Help a server problem with the clock

[mgb]

Help a server problem with the clock
 After clockwise Manager
 Update operator working
 The next day we stay on the old date
 Need a server command
  But update the server
 For example suitable for SME 7.5
 Does not work I suppose a mistake in what it says
 I need the command to register it thanks
 net time set http://smeserver.pool.ntp.org   

[cactus]

Your server should be configured to automatically sync. Are you running your SME Server as a virtual host perhaps?

[mgb]

is config is not work

Date and time configuration
Verify date and time
   New date and time setting: Sunday July 24 2011, 11:44:02 PM Asia/Jerusalem
 
is not the time
the time is  25 15:06 
Asia/Jerusalem

[cactus]

Please answer my question:

Are you running your SME Server as a virtual host perhaps?

We do want to help you please be more specific as saying things don't work leaves us guessing. We are not behind your system and are depending on your information to help you.

What do you mean with:

is config is not work

What command do you execute? What output do you receive?

[mgb]

I do not understand what you mean  = "virtual host perhaps?
"

[piran]

Help a server problem with the clock

0.smeserver.pool.ntp.org
1.smeserver.pool.ntp.org
2.smeserver.pool.ntp.org
3.smeserver.pool.ntp.org

[mgb]

yes
Date and time configuration
   This is where you configure the date and time of this server. You may use an existing network time server or manually set the date and time for your time zone.
 

 Configure Network Time Server
  The server is periodically synchronizing the system clock to the network time protocol (NTP) server specified below. To synchronize to a different NTP server, enter a different hostname or IP address in the field below.
  Current setting: Mon Jul 25 00:44:28 2011
 
  NTP Server 
 
 

[piran]

http://www.isoc.org.il/iix/2x_ntp.html

[mgb]

I see that after I set
 Automatic update clock
 Server management
 Saved impression
 After another entry management
 See not saved settings
 Seeks to define a command
 Run every morning on the server
 No management
 What Linux command
 Usr time to "net use time ????"

 Thanks

[piran]

My interpretation of mgb's current difficulty,
other than the language problem, is that he
needs to enforce NTP from the command line
as opposed to using the given browser
admin management panel?

http://bugs.contribs.org/show_bug.cgi?id=5648
# db configuration show ntpd
ntpd=service
    MemLimit=12000000
    NTPServer=smeserver.pool.ntp.org
    SupportLargeDrift=enabled
    SyncToHWClockSupported=yes
    status=enabled

[mgb]

 You're right  piran

 See the problem
 Command to correct

db configuration show ntpd
ntpd=service
    MemLimit=12000000
    NTPServer=
    SyncToHWClockSupported=yes
    status=enabled
to fix ?
Change the ntp polling frequency:
 config setprop ntpd NTPServer north-america.pool.ntp.org
 expand-template /etc/ntp.conf
 signal-event reboot

is ok ?

db configuration show ntpd
ntpd=service
    MemLimit=12000000
    NTPServer=north-america.pool.ntp.org
    SyncToHWClockSupported=yes
    status=enabled

[mgb]

Now it works I'll check tomorrow Again The hope that the problem was solved 
 final Again thanks for your help

[piran]

[mgb]

is hot woke Again

[mgb]

The issue is resolved Hardware problem Power supply
 Replace power computer power