Hi
We have recently upgrade our 2TB backup USB drive with a 3TB drive but we are running into some issues.
With our previous change of backup disk (1tb to 2tb) when we initiated the affa backup it did a full backup of the system and file were after it continued with the normal updates for the files that just changed. This is not the case anymore and i cant see any change in the below configuration which would stop affa from doing the initial backup?
Can i ask if someone can check and let me know if they see anything wrong?
# EDIT THIS:
my %job=(
'remoteHostName'=>'localhost', # FQHN or IP address
'TimeSchedule'=>'2300', # HHMM,HHMM,...
'Description'=>'affabackup', # text string.
'scheduledKeep'=>1, # integer >= 1
'dailyKeep'=>7, # integer >= 1
'weeklyKeep'=>4,# integer >= 1
'monthlyKeep'=>12,# integer >= 1
'yearlyKeep'=>2,# integer >= 1
'SMEServer'=>'yes', # yes | no
'Include[0]'=>'', # additional files or directories to include
#'Include[1]'=>'',
#'Include[2]'=>'',
'Exclude[0]'=>'', # files or directories to exclude from backup
#'Exclude[1]'=>'',
#'Exclude[2]'=>'',
'RPMCheck'=>'no', # yes | no
'DiskSpaceWarn'=>'risky', # strict | normal | risky | none
'localNice'=>0, # -19...+19
'remoteNice'=>0, # -19...+19
'Watchdog'=>'yes', # yes | no
'sshPort'=>22, # default ssh port is 22
'ConnectionCheckTimeout'=>120, # seconds
'rsyncTimeout'=>900, # seconds
'rsyncCompress'=>'no', # yes | no
'EmailAddresses'=>'bnotify@tagsa.co.za', # name@domain.com,name@domain.com,...
'chattyOnSuccess'=>999, # send N success notifications
'postJobCommand'=>'', # full path to local program/script
'preJobCommand'=>'', # full path to local program/script
'AutomountDevice'=>'/dev/sdc1', # Device to auto mount (e.g. USB drive)
'AutomountPoint'=>'/mnt/affadevice', # the mountpoint for AutomountDevice
'AutomountOptions'=>'', # Optionstring passed to mount command e.g. '-t cifs'
'AutoUnmount'=>'yes', # umount if fs was not mounted before Affa ran
'RootDir'=>'/mnt/affadevice', # where to save the archives.Don't use /root or /home/e-smith
'SambaShare'=>'yes',
'Debug'=>'no', # yes | no
'status'=>'enabled', # enabled | disabled
'rsync--inplace'=>'yes', # yes | no : rsync on source supports '--inplace' option
'rsync--modify-window'=>0, # integer >= 0, timestamp window
);
### nothing to edit below this line ####
Kind regards