Obsolete Releases > SME 8.x Contribs

Port Foward Contrib?

<< < (2/2)

janet:
cattledog


--- Quote ---...oh and my modem is bridged and open all ports directed to sme server...what I am try to do is open ports for steam for son

--- End quote ---

Refer
http://www.resoo.org/docs/counterstrike/steam_ports.html

You use the Port Forwarding panel (which does the dual job of forwarding & opening ports) & follow the guide above
You can select TCP & UDP
Forward the ports to the same ports on the IP of the workstation your son is using

This is really applicable where your sme server is in gateway & server mode

You should not need to be adjusting squid.

Also see this
http://wiki.contribs.org/SME_Server:Documentation:FAQ:Section05

You mention bridged modem & open all ports directed to sme.
In bridged mode you should not need to open or forward ports in your modem, bridged mode means pass through all data without interference.
Maybe take another look at your modem configuration to ensure it really is in bridged mode (which essentially disables all other settings in the modem as they are not needed).

What mode is your sme server in, gateway & server, or server only ?
What other equipment is in front of your sme server between sme & the Internet ADSL or whichever connection ?
Are you setting up a steam client or a steam server ?
What equipment is behind sme server for this, a workstation or maybe another sme server ?

Have you searched this forum site on
steam
and
counter strike
There are older posts about this that may be useful
eg
http://forums.contribs.org/index.php/topic,29942.msg125175.html#msg125175
&
http://forums.contribs.org/index.php/topic,29249.msg125292.html#msg125292
Also have you googled this requirement with sme server, here is one probably unrelated find
http://forums.steampowered.com/forums/showthread.php?t=582914

To scan your ports from external location, use
grc.com

Navigation

[0] Message Index

[*] Previous page