Topic: Backup from 7.6 and Restore concepts 9 64b

[janet]

mgb

Well at least incoming mail will no longer be blocked by aggressive RBL lists.
eg
uceprotect.net

[janet]

mgb

is not work send get mail

What does that mean ?

Let's try to find out by a process of elimination.

1) Can you send an email message from a email client (as user1) on a work station attached to your LAN (behind the sme9 server), to another user2 on an email client on a different workstation attached to your LAN ? (where user1 & user2 are valid user accounts on the sme server)

2)  Can you send an email message using webmail as user1 (connected via a browser) on a work station attached to your LAN (behind the sme9 server), to another user2 using webmail on a different workstation attached to your LAN ? (where user1 & user2 are valid user accounts on the sme server)

3) From a web browser on the LAN behind your sme9 server, can you do a port scan at grc.com & post the results here. This will check to see physically what ports are open from the outside to your Internet connection/WAN/server

4) What mode is your sme9 server in, gateway server or server only ?

5) If your sme9 server is in server gateway mode, is it connected directly to the Internet via a bridged modem or is there some other modem or router in front of your server ? Please describe in detail how your server is connected to the Internet.

[mgb]

Thanks for the help. It was repaired.
Solution.
After the restore the server stopped working properly.
Another operation to restore an older server that was available.
The condition for success is it that the old backing existing users.
The result all the new data updated by the new backup.

I think the problems created
 mrtg
Sme-unjunkmgr

[mgb]

 mgb  config my sme
Everything works in this answer to the previous state
Quote
 What does that mean ?

Let's try to find out by a process of elimination.

1) Can you send an email message from a email client (as user1) on a work station attached to your LAN (behind the sme9 server), to another user2 on an email client on a different workstation attached to your LAN ? (where user1 & user2 are valid user accounts on the sme server)  no

2)  Can you send an email message using webmail as user1 (connected via a browser) on a work station attached to your LAN (behind the sme9 server), to another user2 using webmail on a different workstation attached to your LAN ? (where user1 & user2 are valid user accounts on the sme server) no

3) From a web browser on the LAN behind your sme9 server, can you do a port scan at grc.com & post the results here. This will check to see physically what ports are open from the outside to your Internet connection/WAN/server

4) What mode is your sme9 server in, gateway server or server only ? server only

5) If your sme9 server is in server gateway mode, is it connected directly to the Internet via a bridged modem or is there some other modem or router in front of your server ? Please describe in detail how your server is connected to the Internet. yes

[CharlieBrady]

is not work send get mail

This makes no sense. Getting mail and sending mail are two different processes. If they both don't work, then you need to diagnose and fix at least two different problems.

When you say "is not work", you need to provide more details. When you provide the details, do not modify the log messages. When you change them  (e.g. to say "mydomain" rather than your real domain name, and "admin@.k12.il" rather than a real valid email address) you make it impossible for others to investigate your problem.

Do you have a friend who can help you write better English? Your posts are very difficult to understand.

[mgb]

I thank for the help
The fault has been corrected

With
2 Recovery
First Last backup file created by a server failure
Restoring two old backup file with no problems right the old server

Server upgrade was carried out due to server failure the old 7.6
Upgraded 9
1
Restore on initial reboot after fresh OS install - How to Reset option
config delete PasswordSet
config setprop bootstrap-console Run Yes
signal-event reboot
A full Restore from a backup file (eg located on a USB drive =smeserver.tgz 08-09-2014

2
Restore on initial reboot after fresh OS install - How to Reset option
config delete PasswordSet
config setprop bootstrap-console Run Yes
signal-event reboot
A full Restore from a backup file (eg located on a USB drive =smeserver.tgz 08-08-2014

is fix sme 9 

* By the way
fix problems in Hebrew