Toggle navigation
Koozali.org: home of the SME Server
Community
Forums
Bugs
Lists
Forum Help
Download
SME Server ISOs
Contribs
Documentation
Manual
Wiki
FAQ
HowTo
Donate
Search
Login
Register
Login
Register
×
Close
Login
Remember me
Koozali.org: home of the SME Server
Obsolete Releases
SME Server 8.x
Topic:
NAT file configuration
« previous
next »
+
Print
Pages: [
1
]
Go Down
NAT file configuration
10 Replies
11381 Views
globalsi
167
+0/-0
NAT file configuration
«
on:
March 29, 2017, 04:10:23 PM »
Hi,
Where can I find the file wich contain the NAT configuration ?
Thks
Logged
Daniel B.
1,699
+0/-0
Re: NAT file configuration
«
Reply #1 on:
March 29, 2017, 04:35:00 PM »
If you're talking about PAT rules, they can be set directly from the server-manager (Security -> Port forward). Under the hood, those rules end in /etc/rc.d/init.d/masq. For NAT, there's a single rule, hardcoded in /etc/e-smith/templates/etc/rc.d/init.d/masq/40masqLAN (which is: masqerade outbound IP to the external interface's IP). Depends on what you want to achieve
Logged
C'est la fin du monde !!!
globalsi
167
+0/-0
Re: NAT file configuration
«
Reply #2 on:
March 30, 2017, 09:56:02 AM »
Thank you very much for this perfect answer ! (I was actually looking for the PAT)
«
Last Edit: March 30, 2017, 09:57:36 AM by globalsi
»
Logged
globalsi
167
+0/-0
Re: NAT file configuration
«
Reply #3 on:
April 03, 2017, 11:18:00 AM »
Do you know what are the templates that generate the port forwarding in /etc/rc.d/init.d/masq ?
I don't find them as 40masqLAN for the NAT.
Logged
Daniel B.
1,699
+0/-0
Re: NAT file configuration
«
Reply #4 on:
April 03, 2017, 11:22:51 AM »
Port forwarding are handled by those templates:
/etc/e-smith/templates/etc/rc.d/init.d/masq/42SetupPortForwarding
/etc/e-smith/templates/etc/rc.d/init.d/masq/91adjustPortForward
Logged
C'est la fin du monde !!!
globalsi
167
+0/-0
Re: NAT file configuration
«
Reply #5 on:
April 03, 2017, 12:38:29 PM »
I don't see the port forwarding I created in this files
Logged
Stefano
10,836
+2/-0
Re: NAT file configuration
«
Reply #6 on:
April 03, 2017, 12:41:50 PM »
ahem..
you'd tell us what you are trying to achieve (your problem, not your solution), what you did and how you did it..
"I don't see the port forwarding I created in this files" is quite useless for us, isn't it?
Logged
globalsi
167
+0/-0
Re: NAT file configuration
«
Reply #7 on:
April 03, 2017, 12:49:15 PM »
Hi,
I want to find the PAT configuration of a broken server
I think I can read the disk by removing it from the machine and I would like to find this information somewhere on the disk.
Logged
Stefano
10,836
+2/-0
Re: NAT file configuration
«
Reply #8 on:
April 03, 2017, 01:51:47 PM »
so you need the portforward_* files you find in /home/e-smith/db/ dir on the broken server's hd
Logged
globalsi
167
+0/-0
Re: NAT file configuration
«
Reply #9 on:
April 03, 2017, 02:04:37 PM »
perfect
thank you !
Logged
Stefano
10,836
+2/-0
Re: NAT file configuration
«
Reply #10 on:
April 03, 2017, 02:07:10 PM »
you are welcome..
BTW, to avoid the typical
X Y problem
situation, in the future tell us what's your issue
thank you
Logged
+
Print
Pages: [
1
]
Go Up
« previous
next »
Koozali.org: home of the SME Server
Obsolete Releases
SME Server 8.x
Topic:
NAT file configuration