Obsolete Releases > SME 8.x Contribs
what priority must have my server to send and recieve
janet:
ahmedsa
For mserver.altawi.com.sa
you only have an A record pointing to 78.93.244.61
Also there appear to be no nameservers, so it does not surprise me to find that
in a web browser mserver.altawi.com.sa does not resolve - Connection refused error
Also there is no mx record for altawi.com.sa anymore, it seems it has been changed since yesterday, so incoming mail will not be directed to your mail server ie mserver.altawi.com.sa.
It appears you have setup/changed everything incorrectly (in external DNS & MX records).
The solution proposed to reconfigure the router to be a modem in bridged mode & change server mode to server & gateway, is the answer to a lot of your (internal configfuration) problems (eg open port management).
Someone claims the firewall is configured to allow open ports, well here is the port scan showing open ports & it does not agree with what you claim
Without a lot of other ports being open & forwarded to your "SME server only mode" mail server, then the mail server will not function, so you have firewall problems. Your support people are telling you lies or not doing their job.
nmap -O 78.93.244.61
Starting Nmap 6.25 ( http://nmap.org ) at 2015-11-24 03:26 AEDT
Nmap scan report for mserver.altawi.com.sa (78.93.244.61)
Host is up (0.51s latency).
Not shown: 990 closed ports
PORT STATE SERVICE
23/tcp filtered telnet
113/tcp filtered ident
135/tcp filtered msrpc
139/tcp filtered netbios-ssn
445/tcp filtered microsoft-ds
593/tcp filtered http-rpc-epmap
4444/tcp filtered krb524
6667/tcp filtered irc
6881/tcp filtered bittorrent-tracker
12345/tcp filtered netbus
I read on his website that Graeme Robinson only provides ad hoc support to clients who have an annual support contract with him, so maybe you should try someone else.
I cannot help you any more, you are wasting peoples time here.
Please engage a tech support person to sort out your problems, as it seems you clearly do not understand what you are doing.
It is waste of our time when you will not follow the advice given.
You have internal configuration problems & you have external DNS & MX record configuration problems, & you seriously lack an understanding & comprehension of these technical matters.
Talk to someone locally who understands all these things & you may get the matter resolved.
I doubt that you wil resolve it yourself.
guest22:
http://wiki.contribs.org/Commercial_Support#Africa
janet:
ahmedsa
For remote support you could also try
Quentin Pidduck
Technologywise Ltd
Tauranga NZ
quentin@tw.co.nz
http://www.technologywise.co.nz/
ahmedsa:
Thank you for more support
I do as following
i call isp to open port 25 it is now opened in public ip 78.93.244.61
after this it work send and receiving emails for one day
and disconnect again i do as following
I try to do one thing
i take mail server cable to external switch B
and Cisco router cable to external switch B
and my laptop cable to external switch B
and my router linksys cable to external witch B
then try to access mail server by putty and test internet connection
it is success
meaning when i try to access internet from mail server in old switch
some thing like computer or any prevent connection to internet between mail server and Cisco router
but how i know that thing prevent
my network consist from (old switch
1-domain controller 192.168.1.2
2-router linksys using as gateway 192.168.1.1 for all computer's except mail server
3- router Cisco as gateway 192.168.1.254 to mail server
4- main cable it come from another switch C(include all user's)Works in domain
settings for all computers in domain is
IP 192.168.1.from 1 to 250
sub net 255.255.255.0
gateway 192.168.1.1 i using linksys as gateway for internet dsl
pref dns 192.168.1.2
alternative 192.168.1.1
this is not new settings
i work in that before 5 years
But I don't know why cannot access internet and what is the block internet connection from
router Cisco and mail server
Are router Cisco can give it more permission to prevent that
if you can give me more solution to solve that
the problem now probably in mail server
can you tell me how i check my network block access internet to mail server
guest22:
As requested strongly before, it's time for a complete drawing with all details (e.g. Visio drawing with all components, IP's, services etc). Also, you need to take a fixed point in time to discuss all this and do not change anything anymore. The drawing should have version updates as per change you are making.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version