Topic: SME server as a member server

[smnirosh]

there is a SME  server  configured in my network as Server Gateway. The domain name of this server is Mechdesign.loc. this server distributes IP addresses for clients.
How can i install and configure another server as memeber server/client of Mechdesign.loc domain. And how to set ip address of this memeber server/client to be taken from the domain master, Mechdesign.loc.

[Stefano]

SME doesn't support this feature.. if you really need another SME inside your lan (and I'd be curious to know why) you have to use a fixed IP and replicate all needed users

[smnirosh]

I have a special software to run seperately from the server. which is an account package. I want this server sit in the network and provide the space to this special software. Fixed ip is ok then
The configuration is the problem....

[Stefano]

could you give us some details? maybe we can find some workaround..

[smnirosh]

the domain controller - os sme server 9.0
                name      - mech
      domain name      - mechdesign.loc
      ip local              - 192.168.125.125
     
the proposed sme server may be - os sme server 9.0
                                 name    - accountapp
                           domain name- the memeber of mechdesigh.loc / like accountapp.mechdesign.loc
                           ip address   - 192.168.125.130

i think this is enough information for you to help me

[Stefano]

well

do you need the same users on both servers?

anyway:
on "primary server":
- create a reservation for IP .130 with name accountapp.mechdesign.loc

on the "client" server, setup it with name accountapp domain mechdesign.loc, IP .130, DNS 192.168.125.125

to send emails, on the "client" server, use the primary one as smarthost, authenticating with a valid account

P.S.: when you talk of "member server" you likely talking about M$ servers
-

[smnirosh]

Thanks for the information.
I installed this server as server only mode. Named the system as "accountapp" and domain name is "mechdesign.loc."
But how to logon as a domain user account that is on the "mech" computer (Sme server Domain controller)?

[Stefano]

SME doesn't support this feature.. if you really need another SME inside your lan (and I'd be curious to know why) you have to use a fixed IP and replicate all needed users

if you need to authenticate your users on accountapp you'd think about ldap

do you need samba access on accountapp server?

BTW, when somebody asks you for info about what you need, you'd tell all the story

[smnirosh]

Yes i need samba access. Bcos if we would share documents on this server, we need samba configured to access the documents on this accountapp server.

[Stefano]

then, as per my first answer, you have to replicate all users on both servers, keeping them in sync..

[smnirosh]

that means i have to copy all the user folders to accountapp server?

[Stefano]

yes, you've been told so since the beginning.. that's why I asked you what you are aiming to..

[smnirosh]

yes i understood from the begining.
Ok in this mode, if i change password of a user on domain server, do i have to change the password of the same user on the accountapp computer? or automatically it changes the password?

[Stefano]

yes, sure

[smnirosh]

yes to which question?