I have made a standard installation of SME 10.0 on a 64-bit test workstation with 4 Gb Ram (for now).
SME 10.0-x86_64 iso was downloaded, cheked via MD5 and sha1then burnt to a CD.
Before installation ran memory and disk tests without errors.
The installation was successful with no errors indicated. (Media was tested at the start)
I configured it as "server-only".
When I boot the configured server the boot prompt is displayed then after about 30 seconds the following errors are displayed:
[65.931199] blk_update_request: I/O error, dev fd0, sector 0
[78.117554] blk_update_request: I/O error, dev fd0, sector 0
[90.302761] blk_update_request: I/O error, dev fd0, sector 0
[90.302801] blk_update_request: I/O error, dev fd0, sector 0
(On reboot the numbers in square brackets vary)
I have rebuilt the system several times on other tested disks but get the same errors.
What device does "dev fd0" indicate?
The only disks i have on the server is the HDD and DVD.
Before it's release I have installed 10 alpha, beta and rc1 without these problems.
Thanks for any help.
Alexx