Topic: Koozali SME Server 10.1 is now on the mirrors - enjoy

[TerryF]

Go and have a good read of https://wiki.koozali.org/SME_Server:10.1

Important information re updates and installing as a well as release notes etc

[Jean-Philippe Pialasse]

You will need to update all your contribs with the current update.

new policy for smecontribs with SME10 has been to keep it enabled, if you have restored from a previous version it might be disabled by default

Code: [Select]

db yum_repositories setprop smecontribs status enabled
signal-event yum-modify

then update

[holck]

Thanks a lot for all the effort you've put into this

Can you update from 10.0 to 10.1 via a simple "yum update"? Or is it necessary to do a re-install?

[TerryF]

Thanks a lot for all the effort you've put into this

Can you update from 10.0 to 10.1 via a simple "yum update"? Or is it necessary to do a re-install?

The man above put in a huge effort and yes a yum update will bring you up to 10.1, tho see JPs post above and be aware of the update to the 2.4 syntax in relation to contribs

[Jean-Philippe Pialasse]

yes yum is the way for minor release like 10.0 to 10.1. 


and indeed check all is good with your app running on apache.  You want to update all contribs, and check your custom template as documented on the wiki 10.1 release page

[ReetP]

Great work team.

Lets get v11 done

[Fumetto]

One thing is not clear to me. Up to now to upgrade I have done with "yum update --enablerepo=smecontribs". By now I seem to have understood that I can delete "--enablerepo=smecontribs" because already "pre-activated" from the settings, right?

[Jean-Philippe Pialasse]

Fumetto,

you are right!

[gieres]

After update to 10.1, I can't connect to my wiki's count (unreachable), neither update desktops to debian's servers (dito).
I must run :
 signal-event post-upgrade; signal-event reboot
and all are running well now.

[Jean-Philippe Pialasse]

Giere,

how did you update?

cli or manager ?

[gieres]

Cli :
 yum update --enablerepo=smecontribs

[Jean-Philippe Pialasse]

open bug with full report of transaction and list of contribs

which means /var/log/messages from beginning of yum command to end of temp event. 

also list of updated package from yum.log

[gieres]

https://bugs.koozali.org/show_bug.cgi?id=12181

[bunkobugsy]

e-smith-base-5.8.1-18 was needed prior, reconfigure+reboot didn't go through.
See https://bugs.koozali.org/show_bug.cgi?id=12164 and check messages log.

or maybe I'm wrong, sorry, but a  signal-event post-upgrade; signal-event reboot  always does it

[bclayton]

One of my servers would not complete the update to 10.1.  My other server updated without incident.  Both servers were fully updated.  I did try --skip-broken.  What is the fix, please?    Thanks and I greatly appreciate all the work that went into 10.1!  The log from Putty is below:

 * smecontribs: mirror.canada.pialasse.com
 * smeupdates: mirror.canada.pialasse.com
 * updates: paducahix.mm.fcix.net
Resolving Dependencies
--> Running transaction check
---> Package smeserver-mod_dav.noarch 0:1.1-7.el7.sme will be updated
---> Package smeserver-mod_dav.noarch 0:1.1-8.el7.sme will be an update
--> Processing Dependency: e-smith-apache >= 2.6.0-19 for package: smeserver-mod_dav-1.1-8.el7.sme.noarch
---> Package smeserver-nextcloud.noarch 0:1.2.0-17.el7.sme will be updated
---> Package smeserver-nextcloud.noarch 0:1.2.0-19.el7.sme will be an update
--> Processing Dependency: smeserver-php >= 3.0.0-43 for package: smeserver-nextcloud-1.2.0-19.el7.sme.noarch
--> Processing Dependency: e-smith-apache >= 2.6.0-19 for package: smeserver-nextcloud-1.2.0-19.el7.sme.noarch
---> Package smeserver-phpldapadmin.noarch 0:1.6.0-5.el7.sme will be updated
---> Package smeserver-phpldapadmin.noarch 0:1.6.0-9.el7.sme will be an update
--> Processing Dependency: e-smith-apache >= 2.6.0-19 for package: smeserver-phpldapadmin-1.6.0-9.el7.sme.noarch
---> Package smeserver-phpmyadmin.noarch 0:4.0.10.2-11.el7.sme will be updated
---> Package smeserver-phpmyadmin.noarch 0:4.0.10.2-13.el7.sme will be an update
--> Processing Dependency: e-smith-apache >= 2.6.0-19 for package: smeserver-phpmyadmin-4.0.10.2-13.el7.sme.noarch
--> Finished Dependency Resolution
Error: Package: smeserver-nextcloud-1.2.0-19.el7.sme.noarch (smecontribs)
           Requires: smeserver-php >= 3.0.0-43
           Installed: smeserver-php-3.0.0-42.el7.sme.x86_64 (@smeupdates)
               smeserver-php = 3.0.0-42.el7.sme
Error: Package: smeserver-mod_dav-1.1-8.el7.sme.noarch (smecontribs)
           Requires: e-smith-apache >= 2.6.0-19
           Installed: e-smith-apache-2.6.0-16.el7.sme.noarch (@smeupdates)
               e-smith-apache = 2.6.0-16.el7.sme
Error: Package: smeserver-phpldapadmin-1.6.0-9.el7.sme.noarch (smecontribs)
           Requires: e-smith-apache >= 2.6.0-19
           Installed: e-smith-apache-2.6.0-16.el7.sme.noarch (@smeupdates)
               e-smith-apache = 2.6.0-16.el7.sme
Error: Package: smeserver-nextcloud-1.2.0-19.el7.sme.noarch (smecontribs)
           Requires: e-smith-apache >= 2.6.0-19
           Installed: e-smith-apache-2.6.0-16.el7.sme.noarch (@smeupdates)
               e-smith-apache = 2.6.0-16.el7.sme
Error: Package: smeserver-phpmyadmin-4.0.10.2-13.el7.sme.noarch (smecontribs)
           Requires: e-smith-apache >= 2.6.0-19
           Installed: e-smith-apache-2.6.0-16.el7.sme.noarch (@smeupdates)
               e-smith-apache = 2.6.0-16.el7.sme
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest
[root@provue-server ~]#

[bunkobugsy]

Try this:
yum clean all
yum update --disablerepo=smecontribs
yum update

[bclayton]

Thanks for the response.  That did not work, still get the same errors.

[bunkobugsy]

could you post output of  yum update --disablerepo=smecontribs ?

[bclayton]

Sure.   
[root@provue-server ~]# yum update --disablerepo=smecontribs
Loaded plugins: fastestmirror, post-transaction-actions, priorities, smeserver
Loading mirror speeds from cached hostfile
 * base: mirrors.lug.mtu.edu
 * smeupdates: mirror.canada.pialasse.com
 * updates: atl.mirrors.clouvider.net
No packages marked for update
[root@provue-server ~]#

[bunkobugsy]

You should have these:
# rpm -qa smeserver-php
smeserver-php-3.0.0-43.el7.sme.x86_64
# rpm -qa e-smith-apache
e-smith-apache-2.6.0-22.el7.sme.noarch

Try again:
yum clean all --enablerepo=*
yum update --disablerepo=smecontribs

[bclayton]

OK, here's the output:
[root@provue-server ~]# yum clean all --enablerepo=*
Loaded plugins: fastestmirror, post-transaction-actions, priorities, smeserver
Cleaning repos: base centosplus epel extras fasttrack fws fws-testing remi
              : remi-php55 remi-safe sme7contribs smeaddons smecontribs smedev
              : smeextras smeos smetest smeupdates smeupdates-testing stephdl
              : testing updates
Cleaning up list of fastest mirrors
[root@provue-server ~]# yum update --disablerepo=smecontribs
Loaded plugins: fastestmirror, post-transaction-actions, priorities, smeserver
Determining fastest mirrors
 * base: mirrors.lug.mtu.edu
 * smeupdates: ibsgaarden.dk
 * updates: atl.mirrors.clouvider.net
base                                                     | 3.6 kB     00:00
remi-safe                                                | 3.0 kB     00:00
smeupdates                                               | 2.9 kB     00:00
updates                                                  | 2.9 kB     00:00
(1/5): smeupdates/primary_db                               | 1.2 kB   00:00
(2/5): base/7/x86_64/group_gz                              | 153 kB   00:00
(3/5): remi-safe/7/x86_64/primary_db                       | 2.3 MB   00:01
(4/5): base/7/x86_64/primary_db                            | 6.1 MB   00:03
(5/5): updates/7/x86_64/primary_db                         |  17 MB   00:05
No packages marked for update
[root@provue-server ~]#

[bunkobugsy]

and for these?
rpm -qa smeserver-php
rpm -qa e-smith-apache

[bclayton]

[root@provue-server ~]# rpm -qa smeserver-php
smeserver-php-3.0.0-42.el7.sme.x86_64
[root@provue-server ~]# rpm -qa e-smith-apache
e-smith-apache-2.6.0-16.el7.sme.noarch
[root@provue-server ~]# ^C
[root@provue-server ~]#

[bunkobugsy]

You should have these repos enabled:
 * base:
 * smeaddons:
 * smeextras:
 * smeos:
 * smeupdates:
 * updates:

yum update --enablerepo=smeos

[bclayton]

I believe they are all enabled.  Can you give the cli command to check to be sure?

[bunkobugsy]

/sbin/e-smith/audittools/repositories

can be easily enabled from server-manager > Software installer > Change software installer settings

yum update --enablerepo=smeos   should get you updated, but make sure repos are enabled

[bclayton]

Thanks, I did check server-manager.
Here is the output of the first command.  But after I ran the yum update --enablerepo=smeos command, the updates completed.
Thank you so much for your help!!  What outstanding support you guys provide!  I'm fully updated.

[root@provue-server ~]# /sbin/e-smith/audittools/repositories
base: enabled
centosplus: disabled
epel: disabled
extras: disabled
fasttrack: disabled
fws: disabled
fws-testing: disabled
remi: disabled
remi-php55: disabled
remi-safe: enabled
sme7contribs: disabled
smeaddons: disabled
smecontribs: enabled
smedev: disabled
smeextras: disabled
smeos: disabled
smetest: disabled
smeupdates: enabled
smeupdates-testing: disabled
stephdl: disabled
testing: disabled
updates: enabled
[root@provue-server ~]#

[bunkobugsy]

Great, now enable these repos: smeaddons, smeextras, smeos

[bclayton]

Done!

[Jean-Philippe Pialasse]

great work bunkobugsy debuging bclayton with his disabled repos !

are you able to update now bclayton ?

[ReetP]

Top work team.

Looks like there are several repos there that need to be removed?

Isn't there a command to reset yum repos to default?

Then the OP can add the correct ones via this:

https://wiki.koozali.org/Extrarepositories

[bclayton]

JP, Yes, I am updated.  Thanks to all.

[ReetP]

JP, Yes, I am updated.  Thanks to all.

Please check your repos and set them correctly before you find yourself with more issues.

There are several there that should not be there.

Please reset the repos to defaults and then use the extras repo contribs to set the required ones correctly.

https://wiki.koozali.org/Yum:restoring_default_repositories

[bclayton]

Will do.  Thanks!