Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Devin on February 27, 2001, 07:44:45 PM

Title: isdn
Post by: Devin on February 27, 2001, 07:44:45 PM

Has anyone set up there e-smith to dial up on demand to isdn using dual channel terminal modem. Can someone please help get this setup.  I have never used isdn before so I have no experence with it.

Title: Re: isdn
Post by: Hennie Vermaak on March 06, 2001, 03:23:23 PM

Yes I have.

You have to get your ISDN TA's AT command in the manual
and edit the 40dialup file in /etc/e-smith/temlates/etc/sysconfig/network-scripts/chat-ppp0 accordingly.

I currently use a Dynalink ISDN TA and it is ATB4D"phone number" for single channel and ATB42D"phone number" for dual channel.

Title: templates-custom, not templates (was Re: isdn)
Post by: Charlie Brady on March 06, 2001, 06:25:40 PM

Hennie Vermaak wrote:

> You have to get your ISDN TA's AT command in the manual
> and edit the 40dialup file in
> /etc/e-smith/temlates/etc/sysconfig/network-scripts/chat-ppp0
> accordingly.

No, as has been repeatedly pointed out here, and as is well documented at http://www.e-smith.org/custom/, you should not edit any files in /etc/e-smith/templates, but you should edit the corresponding file under /etc/e-smith/templates-custom.

/etc/e-smith/templates-custom is for you to play with - /etc/e-smith/templates is for e-smith to play with. OK?

Charlie