Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Brandon Friedman on March 01, 2001, 06:22:36 PM

Title: Intel 82562ET on-board lan ... not working?
Post by: Brandon Friedman on March 01, 2001, 06:22:36 PM

Has anybody setup e-smith on a m/b with this on-board lan??? e-smith auto-detects it as a pro/100 etherexpress but then won't load the the driver because card not found....

It is a intel desktop m/b D815EEA

HELP!

BF

Title: Re: Intel 82562ET on-board lan ... not working?
Post by: Alejandro on March 01, 2001, 07:12:31 PM

I have the same mother board at home
Will try a new e-smith system an see what hapen
if you  are not hurry (have to get a secon disk to test it)
Alejandro

Title: Re: Intel 82562ET on-board lan ... not working?
Post by: Brandon Friedman on March 01, 2001, 07:42:04 PM

It is quite urgent.... I have to demo this PC to a client!

I had a look on intel website but nothing about linux drivers???

Brandon

Title: Re: Intel 82562ET on-board lan ... not working?
Post by: Darrell May on March 02, 2001, 07:48:36 AM

Brandon Friedman wrote:
>
> It is quite urgent.... I have to demo this PC to a client!
>
> I had a look on intel website but nothing about linux
> drivers???
>
> Brandon


Brandon, try this:

/sbin/e-smith/db configuration set EthernetDriver1 e100
/sbin/e-smith/signal-event console-save

Regards,

Darrell

Title: Re: Intel 82562ET on-board lan ... not working?
Post by: Brandon Friedman on March 02, 2001, 01:49:08 PM

Hi Darrell

Work great!
Thanks

PS what does this command do?
/sbin/e-smith/db configuration set EthernetDriver1 e100

Brandon

Title: Re: Intel 82562ET on-board lan ... not working?
Post by: Darrell May on March 02, 2001, 08:05:55 PM

Brandon Friedman wrote:
>
> Hi Darrell
>
> Work great!
> Thanks
>
> PS what does this command do?
> /sbin/e-smith/db configuration set EthernetDriver1 e100
>
> Brandon

I had the same problem.  I figured out what was happening and posted on devinfo.  Charlie provided the command line fix which sets the e-smith configuration to use the module e100 module for the on-board nic.  The default RedHat settings wants to use the module eepro100 which is incorrect for newer motherboards with onboard Intel nics.  The modules are found at /lib/modules/2.2.16-22/net/.

Regards,

Darrell