Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Giedrius on March 08, 2001, 11:20:47 AM

Title: E-Smith 4.1.1 halted on startup ...
Post by: Giedrius on March 08, 2001, 11:20:47 AM

E-Smith 4.1.1 halted on startup ...

I have HP NetServer E50 (PIII 550 128RAM SCSI HDD 9.2 Gb)

On e-smith 4.1.1 server Setup - no error !!!

On e-smith 4.1.1 server startup - system halted before Enabling swap space: [OK] .... and no error mesage :)

whats wrong ???

Title: Re: E-Smith 4.1.1 halted on startup ...
Post by: Rick on March 08, 2001, 12:41:29 PM

Looks like a problem with the SCSI interface.

Title: Re: E-Smith 4.1.1 halted on startup ...
Post by: Eric Womack on March 10, 2001, 09:16:37 AM

I am having that problem with a machine as well.  If you find anything, please let me know.

I am using:
4.1.1
2 channel on-board SCSI (2 x 4Gb drives, using RAID1 and using single drive, both did the same)
2 PII 400
256RAM

Title: Re: E-Smith 4.1.1 halted on startup ...
Post by: Eric Womack on March 11, 2001, 05:55:35 AM

I removed all the SCSI drives and installed and IDE drive, but I got the same results.

Eric

Title: Re: E-Smith 4.1.1 halted on startup ...
Post by: Eric Womack on March 11, 2001, 05:55:35 AM

I removed all the SCSI drives and installed and IDE drive, but I got the same results.

Eric

Title: Re: E-Smith 4.1.1 halted on startup ...
Post by: Giedrius on March 12, 2001, 02:11:53 PM

Ok :)

E-smith 4.1.1 work with SCSI if:

1. install e-smith 4.0 or 4.0.1
2. update 4.0 or 4.0.1 to 4.1.0 or 4.1.1

And My HP NetServer E50 (PIII 550 128RAM SCSI HDD 9.2 Gb) startig up .... :)

Title: E-Smith 4.1.1 halted on startup ...
Post by: nickver on March 17, 2006, 12:38:45 PM

I'm running SME server 6 and I'm having exactly the same problem. I only use one IDE drive, and I've never had this problem in the past 3 years.

I've connected a subdomain to an I-bay, and afther that the server rebooted. We'll, not quite actually. It stops at the 'enabling swap space' message....

Please let me know how I can fix this! I'm planning to upgrade to SME server 7 pre4 but I have to make backups first...

Title: Re: E-Smith 4.1.1 halted on startup ...
Post by: CharlieBrady on March 17, 2006, 04:05:36 PM

Quote from: "Giedrius"

E-Smith 4.1.1 halted on startup ...
...
whats wrong ???

Perhaps it died of old age.