Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: NeL on September 07, 2001, 03:17:22 PM

Title: e-smith and eicon diva pci
Post by: NeL on September 07, 2001, 03:17:22 PM

Hello,

I 'm trying to install eicon diva pci on e-smith 4.1.2. Did someone have did it and can help me? I don't find information about this card and i don't understand how to install it. Then if someone did the same installation i would like to have help...
NeL

Title: Re: e-smith and eicon diva pci
Post by: Franck on September 07, 2001, 04:00:16 PM

Linux (and e-smith) does not support the eicon diva pci ADSL Modem.

Sorry... But you cannot use e-smith with it....

Title: Re: e-smith and eicon diva pci
Post by: Jelke van der Meer on September 09, 2001, 02:39:15 PM

You can try isdn4linux. See the how-to pages on e-smith.org

I,m using external ISDN modem via RS232 wich runs on a standard e-smith installation.

Title: Re: e-smith and eicon diva pci
Post by: guestFF on September 09, 2001, 09:00:15 PM

Are you talking about ISDN here or ADSL?

RequestedDeletion

Title: Re: e-smith and eicon diva pci
Post by: NeL on September 10, 2001, 05:36:08 PM

I have a eicon diva pci card for isdn. Then i try to install it in a e-smith server.
If someone hae some information about how to do it...
NeL

Title: Re: e-smith and eicon diva pci
Post by: Pieter van Haren on September 10, 2001, 07:08:55 PM

Hi Nel,

If you really want to use e-smith with ISDN, you can take a look at the site of Kees Blokland (http://www.blokland.co.uk/Kees/docs/e-smith/). He has ISDN working with e-smith in the UK.

You can also use a router to connect to the internet. Fli4l (http://www.fli4l.de) is a one-disk-routerproject which uses a 386 pc.

I'm currently trying Fli4l, but it doesn't work yet, but I think it will soon...

Good luck!!!

Pieter

Title: Re: e-smith and eicon diva pci
Post by: steve on September 11, 2001, 01:47:45 AM

Thats what i use. Fli4l router in my cellar 30 meters away from my e-smith box. Fli4l has not been rebooted for 6 months.

Steve.

Title: Re: e-smith and eicon diva pci
Post by: Karl W. Mueller on September 17, 2001, 05:49:10 PM

The eicon.diehl Diva-pci is supported by the isdn4l-projekt, for further details have a look at their home-page.As far as i know, only the eicon.diehl isdn-diva ISA V1.0 is not supported.
There is a howto written by Klaus Müller about the instal-lation of isdn-card for the e-smith-box. I tryed the version for the v 4.0 but it didn´t work perfectly for me, the v 4.1.2 should be easier to install  (e-smith contributed howtos.

I also use a fli4l-router and I think, they do support the eicon isdn-pci card.
Remembering to the amount of time I wasted to implement an isdn-card into my e-smith box it is very easy, to setup a 386 as an one floppy router under fli4l.


Karl W. Müller

Title: Re: e-smith and eicon diva pci
Post by: NeL on October 09, 2001, 02:15:48 PM

where can i found info about eicon diva pci isdn configuration ?( AT command?)
NeL

Title: Re: e-smith and eicon diva pci
Post by: NeL on October 10, 2001, 03:09:13 PM

Is there someone which have made a isdn connection which work well?
If there is a french which can explain me how to do that ...
Please contact me ( nel@laposte.net)

I can't use my rnis connection.
NeL