Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Peter on December 18, 2001, 07:06:31 PM

Title: no internet access
Post by: Peter on December 18, 2001, 07:06:31 PM

I have set up e-smith 4.1.2 as server gateway, behind an  isdn/router . From my
isp I have got 2 static ip-addresses, and netmask 255.255.255.252
1 static for the isdn/router and the other for e-smith.
My external gateway is set up with eth1 is set up with 62.242.xxx.xx0
netmask 255.255.255.252
External gateway (isdn) 62.242.xxx.xx1
I can ping both ip addresses from the internet , but from a client behind e-smith
i can only ping e-smith (192.168.1.1 and 62.242.xxx.xx0
where did I go wrong?

Title: Re: no internet access
Post by: simpleone on December 21, 2001, 04:41:36 AM

have you enabled IP routing on the ISDN router

Title: Re: no internet access
Post by: Ryan Sutton on December 27, 2001, 12:36:48 AM

Can you ping the .xx1 isdn gateway from the e-smith box?  Does the internet test on e-smith work?

Title: Re: no internet access
Post by: Peter on December 27, 2001, 01:06:59 PM

thanks for your reply
Yes, by setting the external ip address of the router to 62.242.xxx.xx1 it
automatically made a route to 62.242.xxx.xx0

Title: Re: no internet access
Post by: Peter on December 27, 2001, 01:13:31 PM

thanks for your reply
No i cant ping the router and the test fails
the privat address of the router is 192.168.168.230 / 255.255.255.000, and if set up it can act as a DHCP server.I could set e-smith up as server only but then I
would not be behind a firewall

Title: Re: no internet access
Post by: Ryan Sutton on January 11, 2002, 01:42:45 AM

esmith is a firewall if your using 4.1.2 or higher.