Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Darren on January 04, 2002, 07:20:28 PM

Title: E-Smith as a RAS/dial-up server
Post by: Darren on January 04, 2002, 07:20:28 PM

Hello all, hoping you can help.
I have checked the how-to, and FAQs but they don't seem to answer this for me.

I have an E-Smith server with a cable internet connection.
It shares the internet connection for LAN users as it is meant to.

However, I wish to provide internet access for a friend through a 56kbs dial-in modem as well. I do not want to give him admin access ect, as in a remote admin setup!
Merely give him a user account and make the E-Smith box receive his dial in call providing him with net access.

How would I go about this?

Has anyone done this on a user, not admin level?

Thank-you for any and all help,
Regards,
Darren

P.S. we currently have a Win2k server on the LAN providing the dial-in access. But this setup is a stop gap measure and is an overkill.

Title: Re: E-Smith as a RAS/dial-up server
Post by: Robert Heaton on January 05, 2002, 01:23:02 AM

Hi!

I tried this several months ago, and i used this HOWTO & RPM by Stephen Noble.
http://groups.yahoo.com/group/dungog_net/files/readme/readme-dialinserver.html

I Hope this helps,
Rob.

Title: Re: E-Smith as a RAS/dial-up server
Post by: Darren on January 05, 2002, 05:45:20 AM

Thanks Robert, I did read that one though before I posted.
It doesn't allow for any security though.
I was looking for something which allows only people with user accounts to have access.

Did you have any thoughts to share from the experience from a few months ago. Pros - Cons?

Regards,
Darren

Title: Re: E-Smith as a RAS/dial-up server
Post by: Robert Heaton on January 07, 2002, 06:36:54 PM

Hi,

I only used this for my own access to my own server, I wouldn't try this on a REAL server, although you could try contacting Stephen Noble for help, stephen@dungog.net

Sorry I can't help you more,
Rob.

Title: Re: E-Smith as a RAS/dial-up server
Post by: stephen noble on January 08, 2002, 03:50:31 PM

>If you can shed some light on the subject

i first built dialin rpm's for  a 3.1 then 4.0 server
it worked for me at the time and i haven't needed them since

i built a rpm for 4.1.x and later servers as a base for others to improve on but no one gave any constructive feedback so i shelved the effort.

i'm sure others are using dialin but they are keeping quiet about it.

regards
stephen

Title: Re: E-Smith as a RAS/dial-up server
Post by: Robert Devantier on January 08, 2002, 07:07:41 PM

Stephen -

Well, I'm not sure what others did, but in my case I had to resort back to an old WebRamp device for dial-in.  I used your RPM up until I needed to upgrade to SMEv5, and it caused me to punt back to the old hardware closet.  I would like to see an updated version, but lack the expertise to help modify.

So I offer moral support to anybody that wants to continue this project...
Robert Devantier

Title: Re: E-Smith as a RAS/dial-up server
Post by: bart on January 08, 2002, 09:05:28 PM

I guess that Stephen's RPM (still) provides a good basis.

I used Stephen's templates and enhanced it to provide a dial-in for Windows-based boxes (use ppp for dialin to gain samba-network-access), and improved the security.
However, this also was a one-time needed effort (on a v4.0 of e-smith), and it's even not on my shelf anymore (sorry).
But ofcourse I can remember how I did it: used mgetty for pppd-dialin, and config pppd more securely (based on what I know about configuring pptpd and samba; do not forget to *dis*allow shell-access when using mgetty - otherwise your box will be wide open!). Oh, YMMV.

Good luck,
 Bart

Title: Re: E-Smith as a RAS/dial-up server
Post by: D.Garrett on January 09, 2002, 01:26:21 PM

Any chances of a rebuild and howto for the dumb folk. :)

Title: Re: E-Smith as a RAS/dial-up server
Post by: stephen noble on January 11, 2002, 05:25:18 PM

http://groups.yahoo.com/group/dungog_net/files/readme/readme-dialinserver.html
thank you DanielvanRaay for probably fixing the rpm

you guys get an armchair ride !

regards
stephen noble