Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Jeff on January 16, 2002, 08:02:19 AM

Title: supported tape drives
Post by: Jeff on January 16, 2002, 08:02:19 AM

I have a compaq 6000 server with two 4/8 gb DAT drives. but can not get backup to work. here is the result of cat /proc/scsi/scsi

Attached devices:

Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: ARCHIVE  Model: 4326XX 27871-XXX Rev: 0322
  Type:   Sequential-Access                ANSI SCSI revision: 02

Host: scsi0 Channel: 00 Id: 06 Lun: 00
  Vendor: HP       Model: C1533A           Rev: A612
  Type:   Sequential-Access                ANSI SCSI revision: 02

Is there any way to get backup working on this server ?

Title: Re: supported tape drives
Post by: Brian Henderson on January 18, 2002, 02:16:41 AM

I have exactly the same Tape drive in my server - only one of them however

No problems with it what so ever

Title: Re: supported tape drives
Post by: Ari on January 19, 2002, 02:36:09 AM

Jeff wrote:
>
> I have a compaq 6000 server with two 4/8 gb DAT drives. but
> can not get backup to work. here is the result of cat
> /proc/scsi/scsi
>
> Attached devices:
>
> Host: scsi0 Channel: 00 Id: 05 Lun: 00
>   Vendor: ARCHIVE  Model: 4326XX 27871-XXX Rev: 0322
>   Type:   Sequential-Access                ANSI SCSI
> revision: 02
>
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
>   Vendor: HP       Model: C1533A           Rev: A612
>   Type:   Sequential-Access                ANSI SCSI
> revision: 02
>
> Is there any way to get backup working on this server ?

Does the SCSI card have a BIOS on it that allows you access to it at reboot? If so, verify the settings. Barring that, ensure that there is proper termination. Both of those drives should work - though, truth be told - I'm not familliar with running 2 drives at once.

Ari