Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Robert Field on January 28, 2002, 07:17:27 PM

Title: RAID problem
Post by: Robert Field on January 28, 2002, 07:17:27 PM

Can any body please advise how to read the following.  How do I tell which drive is giving the problem.

ALARM! RAID configuration problem

Current configuration is:

Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hdb1[1] hda1[0] 264960 blocks [2/2] [UU] resync=DELAYED
md0 : active raid1 hdb5[1] hda5[0] 15936 blocks [2/2] [UU] resync=DELAYED
md1 : active raid1 hdb6[1] hda6[0] 59769728 blocks [2/2] [UU] resync=4% finish=622.8min
unused devices:

Last known good configuration was:

Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hdb1[1] hda1[0] 264960 blocks [2/2] [UU]
md0 : active raid1 hdb5[1] hda5[0] 15936 blocks [2/2] [UU]
md1 : active raid1 hdb6[1] hda6[0] 59769728 blocks [2/2] [UU]
unused devices:

Title: Re: RAID problem
Post by: Robert Field on January 28, 2002, 07:39:44 PM

I've just read a thread from Mahmood Al-Yousif about his RAID/DIALUP problems.

I've just been setting up Freeswan/IPSEC on a couple of SME5 boxes (see earlier postings http://www.e-smith.org/bboard//read.php?v=t&f=3&i=11016&t=9708 ).

I just got the tunnel to connect and one of the servers completly locked.  When the box was rebooted I started getting the RAID error as posted earlier.



ALARM! RAID configuration problem

Current configuration is:

Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hdb1[1] hda1[0] 264960 blocks [2/2] [UU] resync=DELAYED
md0 : active raid1 hdb5[1] hda5[0] 15936 blocks [2/2] [UU] resync=DELAYED
md1 : active raid1 hdb6[1] hda6[0] 59769728 blocks [2/2] [UU] resync=4% finish=622.8min
unused devices:
Last known good configuration was:

Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hdb1[1] hda1[0] 264960 blocks [2/2] [UU]
md0 : active raid1 hdb5[1] hda5[0] 15936 blocks [2/2] [UU]
md1 : active raid1 hdb6[1] hda6[0] 59769728 blocks [2/2] [UU]
unused devices:



Could this be connected with problem Mahmood noted or am I barking up the wrong tree.

Title: Re: RAID problem
Post by: Fred Thompson on January 29, 2002, 02:36:07 AM

Well, it just looks like your drives are resyncing... it "appears" normal.

if you do a cat /proc/mdstat it will print out your config.

wait until the resyncing is done.

Title: Re: RAID problem
Post by: Robert Field on January 29, 2002, 11:42:28 AM

Thanks Fred


Rob