Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: stitch on February 24, 2002, 10:57:34 AM

Title: Groupwise remote access on port 1677
Post by: stitch on February 24, 2002, 10:57:34 AM

folks,

How do I enable a groupwise client to connect to a groupwise post office  from behind an sme server? The client connects on port 1677. I have istalled the port forwarding module and set it up as follows:

external port : 1677
dest. port : 1677
dest IP :

Am I on the right track?

cheers,
stitch

Title: Re: Groupwise remote access on port 1677
Post by: Des Dougan on February 24, 2002, 11:12:42 AM

Do you mean the client is behind the SME server, and the GW server is outside? If so, you don't need to do anything other than configure the GW client. I have the same setup working OK. If it's the reverse (i.e. GW server behind SME), you'll need to forward the port. Search on the forums for port forwarding - it's a fairly regular topic.

Des Dougan

Title: Re: Groupwise remote access on port 1677
Post by: stitch on February 24, 2002, 11:37:56 AM

Thanks Des. Yes, my client is behind the SME server and the GW server is outside. So in theory this should work OK. I probably have the GW client misconfigured!

stitch