Koozali.org: home of the SME Server
Legacy Forums => Experienced User Forum => Topic started by: Randy Brown on July 04, 2002, 02:31:08 PM
-
Hay guys and gals,
I have just upgraded my e-smith box to 5.5 and i have noticed an issue, I am wondering if anybody else has run into the same problem.
i can no longer access my ibays or my primary web site via samba, i can ftp, web, and my e-mail works fine...
A long time ago i upgraded my samba ( some time in 4.12 i think ) and have not though of it sence... but it is the only thing i can think of that I may have contributed to the down fall of my server.
if anybody can offer any help i would be very thankfull. : )
randy
-
I also got a couple of errors.
system monotor did not start.. i under stand it is not suported,, no problem
but not sure of this one
Jul 3 23:56:13 e-smith migrate-imp-to-turba: Can't call method "finish" on an undefined value at /etc/rc.d/init.d/migrate-imp-to-turba line 162.
Jul 3 23:56:13 e-smith migrate-imp-to-turba: Converting book entries
Jul 3 23:56:13 e-smith rc: Starting migrate-imp-to-turba: failed
-
I had something very similar to that as well
Randy Brown wrote:
>
> Jul 3 23:56:13 e-smith migrate-imp-to-turba: Can't call
> method "finish" on an undefined value at
> /etc/rc.d/init.d/migrate-imp-to-turba line 162.
> Jul 3 23:56:13 e-smith migrate-imp-to-turba: Converting book
> entries
> Jul 3 23:56:13 e-smith rc: Starting migrate-imp-to-turba:
> failed
-
Hi,
Create a custum template-fragment for 11workgroup.
e.g. copy the 11workgroup fragment from /etc/e-smith/templates/etc/smb.conf/11workgroup to
/etc/e-smith/templates-custom/etc/smb.conf/11workgroup
Make this copy look like this:
# [11workgroup]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = yourworkgroupname
where yourworkgroupname is the correct workgroup.
expand the template: /sbin/e-smith/expand-template /etc/smb.conf
restart samba: service smb restart
that's it.
ps. after this issue is fixed by an update you can safely remove the custom template-fragment, expand, and restart samba again.
Regards,
guestHH
-
Graham Harris wrote:
> Randy Brown wrote:
> >
> > Jul 3 23:56:13 e-smith migrate-imp-to-turba: Can't call
> > method "finish" on an undefined value at
> > /etc/rc.d/init.d/migrate-imp-to-turba line 162.
>
> I had something very similar to that as well
As did I:
http://www.e-smith.org/bugs/index.php3?op=showBug&bugID=73
:-)
(Please remember that we can't always get to reading every post
on the boards, so please check the known-bugs list first,
and if you think you've found a bug that isn't there, tell
us about it at bugs@e-smith.com. Thanks!)
Cheers,
-Rich
-
Thanks for the replys. : )
The migrate-imp-to-turba problem is solved.
however the big problem is that i cant access my ibays or my printer over the windows network.... i cant get the e-smith server to come up in windows networking at all. I tryied RequestedDeletion's fix but it did not apear to work at all.
: (
Thanks for trying. I think i will go back to 5.12 till the bugs get worked out.
Does any body know if a 5.5 backup will be able to be restored on to a 5.12?
thanks again.
randy
-
Hi Randy,
It should work.
Did you:
1. create template fragment
2. expand the temaplte
3. restart samba
guestHH
-
yes sir, I did all that... and jusr for fun after that did not work i modifyed /etc/e-smith/templates/etc/smb.conf/11workgroup directly and still no change.
randy
-
When I upgraded to 5.5 I lost the ability to print with a HP 890C that I have had attached to an e-smith (SME) server for ages. Nothing I have done will allow it to print although it is recognized by both Windows 2000 and XP. I now have the printer hooked directly to a W2K system. I don't want to share it, that is what my server is for. Anyone have a solution to this problem?