Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Andrej Fercic on October 04, 2002, 04:33:32 PM

Title: Promise ATA RAID
Post by: Andrej Fercic on October 04, 2002, 04:33:32 PM

Hello !

I am building a hardware list for our new scholl server. I will run on SME for sure, but ?! I want a INTEL MB S845WD1-E which have an PROMISE ATA RAID based on PDC20358 controller. Does anybody run SME on Promise and If are there any problems during installation ???


Thanks,

Andrej

P.S.
I want at least two 80GB disks in RAID1

Title: Re: Promise ATA RAID
Post by: chris on October 05, 2002, 04:54:44 AM

hi,,,
    im chris and im a Technical Engineer For Intel Products ,,,,actually ive tested that Fast Track ATA RAID (Promise ATA RAID) on a S845WD1-E,,,theres no problem using the onboard mirror feature of the motherboard,,,all you have to do is extract the ATA RAID Driver on the motherboards driver disk and that's it,,,,since SME 5.1.2 is based on Linux 7.0 up,,,if either the driver of ATA RAID Driver Fails don't worry and you can go to www.lsilogic.com and obtain the driver for your product.....ive been using SME Server for about a year and tested it on all Intel Server Boards,,,if you have any concern,,dont hesitate to ask or email me,,,,,


chris isidro

Title: Re: Promise ATA RAID
Post by: chris on October 05, 2002, 05:00:31 AM

ive made a mistake ,,,you  can obtain a driver on www.promise.com ...and not on lsilogic.com,,,,,sorry for that

Title: Re: Promise ATA RAID
Post by: Andrej Fercic on October 05, 2002, 11:14:39 AM

TX, Chris !!! I rather ask twice before I make mistake once :) I have some additional questions... Can I contact you off list ?!

Andrej

Title: Re: Promise ATA RAID
Post by: chris on October 07, 2002, 04:54:15 AM

yes you can contact or email me........

cmisidro@redwood.com.ph
systems@redwood.com.ph


bye

Title: Re: Promise ATA RAID
Post by: Mike Foster on October 12, 2002, 03:40:45 AM

Hi Chris
I'm also having problems with an on board RAID
Just a thought, could I use Redhat as and install then use SME as an
Upgrade?
I'm trying to setup a server, Gigabite GA-7VAXP MB with an onboard Promise
Raid SCUSI/IDE . Usig the IDE setting to mirror 2 x 60GB Maxtor Viper ATA133
HDD's. I'm trying to avoid the Windows 2000 solution. I can not get SME to
see IDE' 2 and 3 even with the RAID off. No problems setting it up on 0 and
1.  I have the RedHat drivers from Promise. OR how can I get a copy of 5.6
to try it? I know it is still in development.

Cheers
Mike