Koozali.org: home of the SME Server
Legacy Forums => Experienced User Forum => Topic started by: daley on November 26, 2002, 05:12:35 PM
-
Hi All,
# rpm -ivh dmc-mitel-ez-ipupdate-3.0.10-0.noarch.rpm
Preparing... ########################################### [100%]
1:dmc-mitel-ez-ipupdate ########################################### [100%]
mv: cannot stat /sbin/e-smith/dynamic-dns/custom': No such file or directory
ln: /etc/rc.d/rc7.d/S99easydns': File exists
error: execution of %post scriptlet from dmc-mitel-ez-ipupdate-3.0.10-0 failed, exit status 1
Any idea why it failed???
Regards,
Daley
-
Daley,
Does that fragment (s99easydns) exist?
I've had some trouble with that rpm before, but haven't really been able to trace exactly what is wrong. It seems to be a little bit different everytime I install. I'm thinking there is an order of operation here that I'm just missing. However, I have managed to get it to work everytime with a little bit of mussing about.
Noah
-
try here
http://myezserver.com/phpBB2/
-
Daley,
Darrels How To assumes that you have already configured your server for Dynamic DNS.
What you need to do is step 2 first. This will create the
/sbin/e-smith/dynamic-dns/custom file and set up the configuration parameters.
You then need to
[root@sme5 /root]# rpm -Uvh --force dmc-mitel-ez-ipupdate-3.0.10-0.noarch.rpm
This will force the re-installation of the rpm.
The rest is a case of following the How To
Jon
-
FredS,
can't find it...
Regards,
Daley
FredS wrote,
>try here
> http://myezserver.com/phpBB2/
-
Hi Noah,
How do you recfity the problem ever i have reinstalled rpm, the cut and paste snapshot was my second time installed.
Regards,
Daley
>Author: Arkman (noah_AT_genner.on.ca)
>Date: 11-26-02 10:02
>Daley,
>Does that fragment (s99easydns) exist?
>I've had some trouble with that rpm before, but haven't really been able to trace >exactly what is wrong. It seems to be a little bit different everytime I install. I'm >thinking there is an order of operation here that I'm just missing. However, I have >managed to get it to work everytime with a little bit of mussing about.
>Noah
-
Hi Jon,
the error come out during the rpm installation, it looks i was unable to complete the setup, in fact, i followed exactly the readme.txt, the cut and paste snapshot was my second time installation.
I am using SME 5.5 with the latest update, will try the force installation later.
Thank you.
Regards,
Daley
-
Jon,
After few tried, i manually created a file "custom" in /sbin/e-smith/dynamic-dns, only then you shd have no error while installing this rpm.
After that, you need to create the the template-custom for easydns.conf, else the process will be hang during the SME 5.5 startup.
Regards,
Daley
-
That is what I did as well. Created a custom template with the easydns info in it expanded the template and rebooted, after that worked fine.
-
Hi All,
what else do i need do more???? only then i am able to download catch-all mail from easydns.com, some posts said that i may need to change the easydns.conf from interface=eth1 to interface=ppp0 in order to receive email, that apply to those are the dynamic IP user....
Pls advise.
Regards,
Daley