Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Lancer on January 06, 2003, 11:33:34 PM

Title: Port Forwarding (TCP/UDP) on SME 5.6b7 ??? Anyone can help ?
Post by: Lancer on January 06, 2003, 11:33:34 PM

Hello,
I have SME Server 5.6beta7 running. How can I redirect an incoming TCPIP connect (from internet) on port 4000 to a specific machine in the localnet ?

INTERNET(*.*.*.*)
-->tcp4000-->SMEServer
-->forwardingto-->SME Client machine(ip 192.168.0.5)

Part 2:
---------
Portforwarding incoming UDP port 5000 to a specific machine ?

INTERNET(0.0.0.0)
-->tcp4000-->SMEServer
-->forwardingto-->SME Client machine(ip 192.168.0.5)

I have ADSL (PPPoe) running 24h/7d IP change every 24 hours due to dynamic ip addressing. How can I permanently bind the portdirecting to the system ?

Please help, THANK YOU !!

Greetings
Lancer

Title: Re: Port Forwarding (TCP/UDP) on SME 5.6b7 ??? Anyone can he
Post by: Darrell May on January 07, 2003, 01:43:49 AM

By installing the e-smith-portforwarding rpm found on ftp.e-smith.org under 5.6dev/updates.

Darrell

Title: Re: Port Forwarding (TCP/UDP) on SME 5.6b7 ??? Anyone can he
Post by: Lancer on January 07, 2003, 01:49:33 AM

Hello Darrell,
thank you. How can I install it ? Do you have step-by-step instructions ?

Greetings
Lancer

Title: Re: Port Forwarding (TCP/UDP) on SME 5.6b7 ??? Anyone can he
Post by: Gabriel Requito on January 07, 2003, 05:37:54 AM

Hi Lancer,

I haven't installed that update, but I think you just run the RPM and then go to the server manager and I'll see that you have a new menu relating to Port Forwarding.

Regards,

Gabriel Requito

Title: Re: Port Forwarding (TCP/UDP) on SME 5.6b7 ??? Anyone can he
Post by: Eric on January 07, 2003, 07:28:19 PM

You can't forward UDP ports, you can only open them.  

Use the port opening server-manager panel for that.  You can find it in the contributed rpm's.