Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Greg on January 22, 2003, 12:36:00 PM

Title: Raid alarm after upgrade to 5.6
Post by: Greg on January 22, 2003, 12:36:00 PM

Hello

I have done an upgrade from 5.1.2 ro 5.6 and when the reboot was done we had the following Raid alarm.

It does not appear that any of the drives have failed but more so gone out of sync maybe?

Any thoughts would be much appreciated on the evaluation of the message.

TIA Greg

ALARM! RAID configuration problem

Current configuration is:

Personalities : [raid1]
read_ahead 1024 sectors
md1 : active raid1 hda6[0] hdc6[1]
      38796864 blocks [2/2] [UU]
     
md0 : active raid1 hda5[0] hdc5[1]
      15936 blocks [2/2] [UU]
     
md2 : active raid1 hda1[0] hdc1[1]
      264960 blocks [2/2] [UU]
     
unused devices:

Last known good configuration was:

Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hdc1[1] hda1[0] 264960 blocks [2/2] [UU]
md0 : active raid1 hdc5[1] hda5[0] 15936 blocks [2/2] [UU]
md1 : active raid1 hdc6[1] hda6[0] 38796864 blocks [2/2] [UU] unused devices:

Title: Re: Raid alarm after upgrade to 5.6
Post by: Ray Mitchell on January 23, 2003, 06:41:52 AM

Greg
I think if you just do Step 2 from the HOWTO again that will fix the problem

STEP 2:  initialize and activate raidmonitor
[root@e-smith]# /usr/local/bin/raidmonitor -iv

Regards
Ray Mitchell