Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Chris Snow on April 13, 2003, 09:22:44 PM

Title: APC 700VA SMART-UPS
Post by: Chris Snow on April 13, 2003, 09:22:44 PM: Has anyone managed to get the APC 700VA SMART-UPS running with powstatd on 5.6?

TIA.

Chris
Title: Re: APC 700VA SMART-UPS
Post by: Kelvin on April 14, 2003, 04:40:38 PM: Hi Chris,

Sorry, I have to ask.

If you have an APC Smart UPS, why aren't you using apcupsd ?

By the way, I have used the SmartUPS 700VA with apcupsd and it works well.

Kelvin
Title: Re: APC 700VA SMART-UPS
Post by: Rob Wellesley on April 14, 2003, 06:37:16 PM: Does the smart-ups have a serial port then?

What are you guys doing re UPS's with USB only

rob
Title: Re: APC 700VA SMART-UPS
Post by: Chris Snow on April 14, 2003, 07:28:37 PM: I'm not using anything at the moment. I just wanted to know if the 700VA worked with 5.6 and power monitoring software before I go out and buy one.

I now know the answer!

Thanks,

Chris
Title: Re: APC 700VA SMART-UPS
Post by: Kelvin on April 15, 2003, 02:24:28 AM: Hi Rob,

I was trying to get apcupsd under the older SMEs to work with USB UPSes with no luck. However, I believe there is a newer apcupsd that works with kernel 2.4.x that does work with USB APC UPSes. Haven't gotten around to testing again though.

Kelvin
Title: Re: APC 700VA SMART-UPS
Post by: Jáder Marasca on May 28, 2003, 04:20:52 AM: Kelvin wrote:
>
> Hi Rob,
>
> I was trying to get apcupsd under the older SMEs to work with
> USB UPSes with no luck. However, I believe there is a newer
> apcupsd that works with kernel 2.4.x that does work with USB
> APC UPSes. Haven't gotten around to testing again though.

What version of apcupsd are you using ?

I´m trying to install my BackUPS 600ES with apcupsd from Darrel May (3.8.5) and later un upgrade to 3.10.5 but with no luck...

Can you help me ?

Thanks!

Jáder
Title: Re: APC 700VA SMART-UPS
Post by: Rob Wellesley on May 28, 2003, 06:06:43 AM: Jáder Marasca wrote:

>
> What version of apcupsd are you using ?
>
> I´m trying to install my BackUPS 600ES with apcupsd from
> Darrel May (3.8.5) and later un upgrade to 3.10.5 but with no
> luck...
>
> Can you help me ?
>

hi

Darrels contrib only works with serial cables not USB cables. Don't know of a contrib for USB yet

nut is on 5.6 - http://www.exploits.org/nut/

don't know if it handles USB

rob
Title: Re: APC 700VA SMART-UPS
Post by: Kelvin on May 28, 2003, 06:16:07 AM: Hi Jader / Rob,

Rob's right.

Only the current apcupsd (not the ones available from Darrell) will support USB but I have not seen anyone create a contrib for it yet and I have had too many things happening to get back into it.

As Rob says, nut is in SME 5.6 and by default, it is set up for USB support. I've been playing with nut lately (to try and get a Sola 510 to work - but could not) and it looks useful but as I could not find any documentation about it with regards to the SME implementation of it (ie. what db settings to set to do what ?????), I've only been experimenting by bypassing all the templates and working with the commands directly at the console.

Kelvin
Title: Re: APC 700VA SMART-UPS
Post by: Jáder Marasca on May 28, 2003, 04:03:58 PM: Hi Rob & Kelvin & others....

I installed Darrel contrib (to have SME panel) and a new apcupsd package (3.10.5 and Darrel cames with 3.8.5!) to try to enable my BackUPS 600ES... even follow Darrel tips about to use usb as cable type and ups type... but nothing...
I also wrote to Darrel forum and I´m waiting his answer ...
I´ll let this forum know the Darrel answer (if it do not answer it here too!) :-)

Thanks!

Jáder

Kelvin wrote:
>
> Hi Jader / Rob,
>
> Rob's right.
>
> Only the current apcupsd (not the ones available from
> Darrell) will support USB but I have not seen anyone create a
> contrib for it yet and I have had too many things happening
> to get back into it.
>
> As Rob says, nut is in SME 5.6 and by default, it is set up
> for USB support. I've been playing with nut lately (to try
> and get a Sola 510 to work - but could not) and it looks
> useful but as I could not find any documentation about it
> with regards to the SME implementation of it (ie. what db
> settings to set to do what ?????), I've only been
> experimenting by bypassing all the templates and working with
> the commands directly at the console.
>
> Kelvin
Title: Re: APC 700VA SMART-UPS
Post by: Jáder Marasca on July 11, 2003, 12:23:20 AM: Just to let ALL of you to know: DARREL MAY NEVER answered my question on his own forum!

Just look at: http://myezserver.com/phpBB2/viewtopic.php?t=376

I´m trying... but I cannot get it working...

Anyone else has another idea?

Thanks!

Jáder
Title: Re: APC 700VA SMART-UPS
Post by: Charlie Brady on July 11, 2003, 12:52:44 AM: Jáder Marasca wrote:

> Anyone else has another idea?

Try "nut" - part of fully upgraded 5.6. It's disabled by default, but you should be able to work out how to enable it - it's just like all other services, controlled by the config db.

Charlie
Title: Re: APC 700VA SMART-UPS
Post by: Jáder Marasca on July 12, 2003, 06:55:35 PM: Charlie,

WHERE I can find some doc about NUT?
Nobody knows about it...
What kind of web interface it has?
How difficult is do it work?
...
Title: Nut (Re: APC 700VA SMART-UPS)
Post by: Charlie Brady on July 12, 2003, 10:29:35 PM: Jáder Marasca wrote:

> WHERE I can find some doc about NUT?

rpm -qd nut

> Nobody knows about it...

Certainly not true. For example, search for "nut" at rpmfind.net.

> What kind of web interface it has?

As we configure it, none.

> How difficult is do it work?

I think you mean "how do I enable it?".

/sbin/e-smith/config set nut service status enabled
/sbin/e-smith/signal-event post-upgrade
/sbin/e-smith/signal-event reboot

Charlie
Title: Re: Nut (Re: APC 700VA SMART-UPS)
Post by: Jáder Marasca on July 13, 2003, 01:26:40 AM: Charlie,

Thanks by your info. I´ll read it to learn about NUT.

bye!

Jáder