Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Harvey Dewan on July 18, 2003, 02:50:54 PM

Title: 553 Sorry, that domain isn't in my list of allowed rcpthosts
Post by: Harvey Dewan on July 18, 2003, 02:50:54 PM

I am very new to this product, so I will ask for forgiveness up front.  Here is my issue.  On the insde everything works fine, on the outside I can recive mail but cannot send mail. I get the following error.  I am using ver 6 beta2.

"The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'user@domain.org'. Subject 'test', Account: 'work smtp', Server: 'server.address', Protocol: SMTP, Server Response: '553 Sorry, that domain isn't in my list of allowed rcpthosts.', Port: 25, Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC79"

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: Julian Luton on July 18, 2003, 03:57:52 PM

Hi there
this is because your server will not relay mail that arrives from outside it's local network
i.e. it will only accept mail that is addressed to your domain when that mail comes from the outside world

you can fix this on sme 5.6 by using this contrib
http://www.lordsfam.net/downloads/production/securemail/
that'll give you authenticated smtp to allow you to relay from outside
not too sure if it'll work on 6.0 - but then you'd never be using a beta in a production enviroment anyway :-)

all the best
julian

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: guestHH on July 19, 2003, 01:51:32 AM

or you can add you sending IP in the local networks section in server manager. Use a subnet of 4x255 to ensure that _only_ that specific IP can connect and send.

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: Tony Hansen on July 29, 2003, 07:14:13 AM

Can you tell me which rpm from
http://www.lordsfam.net/downloads/production/securemail/
to install? Thanks.

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: Morten U. Hansen on October 10, 2003, 01:44:59 AM

Hi RequestedDeletion,

Could you elaborate on your answer above. What if the two locations I intent to allow are from the Internet on each their own ISP with Dynamic IP adresses.

How do I config this in the SME 5.6 Local Networks?

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: Morten U. Hansen on October 10, 2003, 02:51:09 AM

Hi again,

It seems that Damien Curtain's rpms are not without problems. I have for hours been trying to update my SME 5.6 with the Securemail RPMs mentioned above and keep getting this error message.

Oct  9 23:40:38 indsigt1 e-smith[4955]: S10update-rpm-system=action|Event|update-rpm-system|Action|S10update-rpm-system|Start|1065735626 36988|End|1065735638 554579|Elapsed|12.517591
Oct  9 23:45:37 indsigt1 e-smith[5199]: Processing event: update-rpm-system
Oct  9 23:45:37 indsigt1 e-smith[5199]: Running event handler: /etc/e-smith/events/update-rpm-system/S10update-rpm-system
Oct  9 23:45:38 indsigt1 e-smith[5199]: error: failed dependencies:
Oct  9 23:45:38 indsigt1 e-smith[5199]: ^Ie-smith-securemail >= 0.0.3 is needed by e-smith-ssmtp-sme5.6-0.0.3-1dc
Oct  9 23:45:38 indsigt1 e-smith[5199]: ^Ie-smith-cvm-unix >= 0.0.3 is needed by e-smith-ssmtp-sme5.6-0.0.3-1dc
Oct  9 23:45:38 indsigt1 e-smith[5199]: ^Icvm >= 0.11 is needed by e-smith-ssmtp-sme5.6-0.0.3-1dc
Oct  9 23:45:38 indsigt1 e-smith[5199]: ^Ie-smith-packetfilter >= 1.12.0 is needed by e-smith-ssmtp-sme5.6-0.0.3-1dc
Oct  9 23:45:40 indsigt1 e-smith[5199]: S10update-rpm-system=action|Event|update-rpm-system|Action|S10update-rpm-system|Start|1065735937 141623|End|1065735940 754058|Elapsed|3.612435

I have then tried to download these packages, but in vain.

How to do this the easy way. I'm not too familiar with all these packages. I would like to have one package that includes everything. Getting mighty tired of this looking around for RPMs. And then when trying to install them  - there are new dependencies to worry about. What is this???

Sorry for my obvious frustration - please help

Morten

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: phillip ramirez on October 16, 2003, 06:40:41 AM

this has just happened to me as well. has never been a problem before and worked flawless from upgrade and install of package. just started happening this week and i am not close to home.. how can i fix this?? =(.. BTW i am on dialup and dont have a specific ip sense every time i dialin i get a new  as well as a possible new comeplete ip address

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: Terry on October 16, 2003, 07:49:48 AM

Hey there Phillip, you never mentioned you installed Secure mail before.  You were using this before?

PS-'Zuki's rule, but I'm looking into purchasing a YJ.  :)

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: phillip ramirez on October 17, 2003, 05:39:11 AM

yea i installed secure mail.. was installed with the last problems i had haha.. it is just weird that this all of a sudden happened.. I am not trying to get pptp to work as a backup..

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: Terry on October 17, 2003, 05:47:20 AM

Is Damien watching this thread?  Has anyone emailed him?  Maybe he's looking into it...

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: phillip ramirez on October 17, 2003, 06:07:09 AM

I havnt emailed anyone figured id check here and ran across this thread.. now that im away from the house for a month so i cant just reinstall anything haha though i can actually upload and do it via putty.. how can i add this domain to the rcpthosts?? and yes zuks rule haha

Title: Re: 553 Sorry, that domain isn't in my list of allowed rcpth
Post by: Morten U. Hansen on October 24, 2003, 04:07:16 PM

What is happening with this thread any answers to my questions above.

Don't anybody have a flawless RPM that I can easily install on my SME 5.6?

Thanks in advance

Morten

PS my users are getting very impatient - and I have to listen to them bitch!