Koozali.org: home of the SME Server
Legacy Forums => Experienced User Forum => Topic started by: Kent Budolfsen on September 27, 2003, 06:09:52 PM
-
I have two hdds in my SME-server one on 160 and one 80 gb.
/dev/hdc6 ext2 131832100 60330120 64805288 49% /
/dev/hdc1 ext2 15522 2650 12071 19% /boot
/dev/hdd6 ext2 76667488 60370880 12402052 83% /mnt/80gb
As you can see they are both mount.
My question is why are the total gb in windows only 160 and not 240.
I hope that someone can help me sorting this problem out.
-
Only the USERS and IBAYS are the viewable HD which is on /dev/hdc6 / the other HD on /dev/hdd6 is on /mnt/80gb you need to make sure that it is either on the IBAYS or USERS but you still wldnt see "240"
Hope this at least guides you in a direction
Byte
-
If I understand you correct then I can mount my 2nd hdd from /home/e-smith/files/ibays instead of from /mnt/80gb then I should see what is on the 2nd hdd.
-
thats right just create a IBAY folder via sme manager then in the fstab do something like...
/dev/hdd6 /home/e-smith/files/ibays/ ext2 ......
then that will auto mount it when booting next time
*BE CAREFUL WHEN DOING THIS*
Byte
-
The other thing is that if you use quota, you'll only see the size of your quotum, not the size of your entire disk.
If you don't use quota you can disregard this message :-)
Michiel
-
It is working fine, but I can't get access to the mounted drive.
It keeps asking for username and password.
Could it have anything to do with the fact that the 80 gb hd is an old SME server installation and not a clean hd.
If so how can I change it so I don't need a username and a password.