Koozali.org: home of the SME Server
Legacy Forums => Experienced User Forum => Topic started by: Peter on January 12, 2004, 11:21:32 AM
-
I have installed Raidmonitor, and am now getting this message every 15 minutes
ALARM! RAID configuration problem
Current configuration is:
Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0] hdc3[1]
264960 blocks [2/2] [UU]
md1 : active raid1 hda2[0] hdc2[1]
77778624 blocks [2/2] [UU]
md0 : active raid1 hda1[0] hdc1[1]
104320 blocks [2/2] [UU]
unused devices:
Last known good configuration was:
Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0] hdc3[1]
264960 blocks [2/2] [UU]
md1 : active raid1 hda2[0] hdc2[1]
77778624 blocks [2/2] [UU]
[=======>.............] resync = 39.7% (30880712/77778624) finish=78.1min speed=10002K/sec
md0 : active raid1 hda1[0] hdc1[1]
104320 blocks [2/2] [UU]
unused devices:
I'm not sure how to interpret this message, any explanation would help
only difference is in Last known good configuration
md1 : active raid1 hda2[0] hdc2[1]
77778624 blocks [2/2] [UU]
[=======>.............] resync = 39.7% (30880712/77778624) finish=78.1min
does this mean that the raid isn't resyncing at all
[%sig%]
-
A quick serach brought this up -
http://forums.contribs.org/index.php?topic=9009.msg34069#msg34069
note the difference between -iv and -v
Have you checked Darrel Mays howto on this, it should be in the contribs section?
PeterG.
-
Thanks for the response
> http://forums.contribs.org/index.php?topic=9009.msg34069#msg34069
I've Checked this thread already and not much joy
ran 'cat /proc/mdstat'
there's no resyncing going on at the moment, but still getting the Email
> note the difference between -iv and -v
Noted differences
> Have you checked Darrel Mays howto on this, it should be in the contribs section?
I installed it while reading the HowTo
just initialize and activate raidmonitor again, to see if the Email comes in differently
will let you know how it goes
-
Any joy?
I think I might have have had this problem when I was testing the raid rebuild process. Try a re-boot after it has finished.
It's starting to sound more like microsoft every day...
PeterG.
-
The Problem has stopped after I iinitialized and re-activated raidmonitor again
all seems to be going well
thanks for your responses.