Koozali.org: home of the SME Server

Legacy Forums => Suggestions => Topic started by: NeilC on April 07, 2003, 02:14:47 PM

Title: USB ADSL Modems
Post by: NeilC on April 07, 2003, 02:14:47 PM

Anyone worked out how to get e-smith to support ADSL modems. Is this support planned for the future...

N

Title: Re: USB ADSL Modems
Post by: Jonty on April 10, 2003, 02:58:39 PM

I have sort of. You need to download eciadsl rpm from http://eciadsl.flashtux.org/ and install it. There is a dependency on a file called wish which you can ignore. Once installed goto /usr/local/bin and run ./eciconftxt.sh which will walk you through the config. Its pretty straight forward and reliable. Once configured you can type 'startmodem' to connect.

I have put 'startmodem near the end of my /etc/rc.d/rc.sysinit file so that the ADSL connects automatically after a reboot.

So it all seems to work except for this part: I have configured the gateway as a dedicated connection and it has picked up the correct IP address, but it only allows me web access. Nothing else seems to work. I think this is becuase the config databases are using eth1 not ppp0 for the external interface device name. If anyone can tell me how to change this I would be grateful.

Title: Re: USB ADSL Modems
Post by: Karl W. Mueller on May 21, 2003, 09:20:09 PM

Hello Jonty

I visited the mentioned site and couldnt find the Acer AAU-AE00 or the Allied Telesyn AT-AR 215 modem. Both seem to share the same hardware (?) and there is a linux-driver available. It is called the "eagle-driver" and comes from France.
I found it at www.eagle-usb.eisfront.de.

Version 0.4 works with both of the above mentioned modems. There is also a precompiled archive for the Redhat based IP-cop router, that might work together with the e-smith server.

I would like to combine this driver with the eciadsl.rpm


Karl

Title: USB ADSL Alcatel Modem
Post by: Quadrax on June 06, 2003, 08:42:09 PM

Hello,

I desire use SME Server 5.6 like a web server but, I can't to do because, I have a USB ADSL Modem (manufactured by Alcatel).

It is possible to have help to find how to configure it properly ?
Also, how to install others softwares because, I am a "newbees" and, I just configure server on my LAN after Install CD job. :o/ :o(

Thank you for this help.


Best regards,

Quadrax



P.S.
- A french language help will be very nice for me.
- Modem LEDs are green = OK for USB and ADSL. I think it's a little thing to do.

Title: Re: USB ADSL Modems - Sorry !
Post by: Quadrax on June 06, 2003, 08:46:33 PM

Oups !
I'm sorry !!
I don't understand why my 'post' is here and not in the "General Discussion" forum.
:o(

Title: Re: USB ADSL Alcatel Modem
Post by: Karl W. Mueller on June 07, 2003, 12:03:08 AM

Hi Quadrax,

My French is to bad for this mail - Sorry, what about your German?

There is a driver available for the acer usb-modem. If the alcatel-modem  would be just another brand of the same hardware, you can try it. I guess, it is the acer ATA AU 2015, but Im not shure. You can find further details at the usb-eisfront page. Try it with google or wait until Tuesday 10th of June. Then I´ll be back home and can have a look in my scripts.

Karl

Title: Re: USB ADSL Alcatel Modem
Post by: Quadrax on June 07, 2003, 04:09:45 AM

Hi Karl,

No, my german is not avalaible but, one, chinese sure ! ;o)

Thank you for the suggestion on "usb-eisfront".

Some links about my modem :

- http://www.google.fr/search?q=ADSL+USB+Modem+Alcatel&ie=ISO-8859-1&hl=fr&meta=cr%3DcountryFR
  --> http://benoit.papillault.free.fr/speedtouch/index.php3 (english version available)

- http://www.google.fr/search?hl=fr&ie=ISO-8859-1&q=ADSL+USB+Modem+Alcatel+and+e-smith&meta=cr%3DcountryFR
  --> http://membres.lycos.fr/bazimon/stu-install.html

- http://www.speedtouch.fr/
  --> http://www.speedtouch.com/press.htm#ktl
  --> http://www.speedtouch.com/press.htm#upnp

- http://www.chez.com/speedtouch/


It's too late now, I go bacck later (sleep time...)

Bye !


Quadrax