Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: roballen on February 23, 2004, 12:17:59 PM

Title: Dual NIC
Post by: roballen on February 23, 2004, 12:17:59 PM

Hello

Has anyone experienced using a dual NIC PCI card in an e-smith/mitel server?

I have an EPIA board, which only has one PCI slot. The onboard NIC, which was used for the LAN, has failed.

A dual NIC in the only available PCI slot would save me from having to trash the board.

Any suggestions on this would be appreciated.

Thanks
Rob

Title: Dual NIC
Post by: byte on February 23, 2004, 02:14:48 PM

Hi,

I a Dual 3Com Nic in my Server (5.6)

Byte

Title: Dual NIC
Post by: roballen on February 23, 2004, 04:33:29 PM

Hi

Would it be possible to tell me the model number of the 3Com card which you are using? The 3Com range is huge.


Thanks

Rob

Title: Dual NIC
Post by: f2racer on February 24, 2004, 05:29:12 PM

I've got a Compaq dual ethernet (uses Intel chips) PCI adapter in my SME 6 server (built around an Asus CUW-FX with no onboard ethernet) and it works great.  Don't have the part #, but I bought it off eBay for $20 shipped.

Title: EPIA &NIC
Post by: Jáder on February 26, 2004, 01:34:18 AM

Hi

I´m using a EPIA 5000 and other 800 as SME servers with no problem.

What happened with your NIC... isn´t working or you can get it working on SME?

I can help you...same config here: SME w/2 NIC (internal + RTL8029 for ADSL router!)

Jáder