Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: PeterG on March 05, 2004, 12:28:34 PM

Title: e100 & e1000 drivers on 6.0
Post by: PeterG on March 05, 2004, 12:28:34 PM
wotcher all,

Now I was sure I had seen somewhere on contribs an rpm for the intell e100 and e1000 nic's for running on a v6.0 server, but I can't find 'em.

Anyone know where they are?

PeterG.
Title: e100 & e1000 drivers on 6.0
Post by: byte on March 05, 2004, 04:41:36 PM
Sure have seen them Peter  8-)

http://www.ibiblio.org/pub/Linux/distributions/smeserver/contribs/dmay/smeserver/6.x/contrib/Intel/
Title: Re: e100 & e1000 drivers on 6.0
Post by: Charlie Brady on March 06, 2004, 04:18:33 AM
Quote from: "PeterG"
wotcher all,

Now I was sure I had seen somewhere on contribs an rpm for the intell e100 and e1000 nic's for running on a v6.0 server, but I can't find 'em.

Anyone know where they are?

PeterG.


Why bother with the intel drivers? The stock (bundled) e100 and e1000 drivers work fine.

Charlie
Title: Re: e100 & e1000 drivers on 6.0
Post by: jbillings on July 01, 2004, 10:28:32 PM
PeterG.[/quote]

Why bother with the intel drivers? The stock (bundled) e100 and e1000 drivers work fine.

Charlie[/quote]

You obviously have not installed 6.0.1 on a Dell Poweredge 700 then.
Title: Re: e100 & e1000 drivers on 6.0
Post by: NickR on July 02, 2004, 10:33:16 AM
Quote from: "jbillings"
PeterG.

Why bother with the intel drivers? The stock (bundled) e100 and e1000 drivers work fine.

Charlie

You obviously have not installed 6.0.1 on a Dell Poweredge 700 then.


They work perfectly on a Poweredge 1600 & 2600, so what's different about the 700?  Some bastardised VE chipset, no doubt.
Title: Re: e100 & e1000 drivers on 6.0
Post by: gzartman on July 04, 2004, 09:03:51 PM
Quote from: "Charlie Brady"


Why bother with the intel drivers? The stock (bundled) e100 and e1000 drivers work fine.

Charlie


The stock SME 6x install doesn't recognize the e1000 ethernet adapter, nor does the console have an option to select it.  I had a similar problem when recently install SME on a Dell Poweredge server.  

My best suggestion:  Install SME and select the e100 for the e1000 adapter and assign this adapter as your internal nic card.  After the install is complete go in and change the e100 to e1000 manually.  That worked fine for me.

Greg