Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Mark R on March 25, 2004, 11:08:14 AM

Title: DM602 Netgear Router/Modem
Post by: Mark R on March 25, 2004, 11:08:14 AM
has anyone had any joy with SME and the Netgear DM602 router/modem

thanks
Title: DM602 Netgear Router/Modem
Post by: ltwt on March 25, 2004, 09:04:26 PM
With what respect?

I have a DM602 installed using ethernet rather than USB and then 30ft away is the SME server...

Having had the headaches (and no slip) for the last 24 hours, how can I help :)

Elwyn
Title: DM602 Netgear Router/Modem
Post by: Mark R on March 26, 2004, 10:54:58 AM
Well..........

i set my sme up as a gateway/dedicated server for my lan, but after a while (2mins-10mins) i loose my internet connection. it seems that my ethernet link from sme to the DM602 router goes down.(lan light flashes on dm602), everything still works on the lan ie sme mail/web, just no net connection.

i have set my netgear router to router mode????

thanks for your help
Title: DM602 & SME Problems
Post by: Anonymous on March 26, 2004, 11:19:18 AM
I have found this connectivit problem as well! Are you running with two network interfaces on the SME box?

What I've ended up doing is having the SME's 2 NICs plugging into a 10/100 hub where also the network cable from the switch (another room, along with the 602) and all the other network connections plug into and using just the NAT from the 602 and not touching the SME.

I found it kept dropping the connection after 20-30 minutes for some reason and my entire network slowed considerably.

I've downloaded the manual and hope to look that over later...

Elwyn
Title: last message...
Post by: ltwt on March 26, 2004, 11:20:49 AM
Ahh sorry, hadn't logged in then and I'm normally asked... Hmm

Guest, aka Ltwt, aka Elwyn ;(
Title: DM602 Netgear Router/Modem
Post by: Mark R on March 26, 2004, 11:33:19 AM
I have got 2 nics on different subnet to my internal lan.

it is working at the mo, but not sure if its working right, on installation it asks for "Master DNS server IP" if i put BT's dns servers ip in there it seems to work ok. only problem is i cannot connect to any of my virtual domains on the sme server?!?!?!

cheers
Title: DM602 Netgear Router/Modem
Post by: ltwt on March 26, 2004, 11:46:28 AM
Ahh right!

I was told that when it was thus:

602 > Switch > SME > Other PC's

then your PC's gateway, dns, etc are pointing at the SME.

Your SME gateway, dns etc are pointing at the 602 and that then connects to the web...

HTH

Elwyn
Title: DM602 Netgear Router/Modem
Post by: Mark R on March 26, 2004, 12:12:05 PM
Thats my understanding....

but if i create www.beerandsleep.net(example) on the sme server and i type that into a client browser i get the beerandsleep internet website!?!
i presume this is because i am entering a Master dns on the sme machine??

thanks
Title: DM602 Netgear Router/Modem
Post by: Mark R on March 26, 2004, 12:17:10 PM
I hope ive set it up right???

Lan
(192.168.0.*)
|
(192.168.0.5)1st nic
SME
(192.168.1.2)2nd nic
|
(192.168.1.1)
DM602
Dynamic IP (from ISP)
Title: DM602 Netgear Router/Modem
Post by: Anonymous on March 26, 2004, 02:50:03 PM
This is where someone more advanced comes in and explains the problem.

The Netgear DM602 is a USB/Ethernet ADSL NAT Router with just one Ethernet port. I've got mine that goes into a switch then to the rest of the network, with 2-4 machines on win98 and the SME box.

Good luck :) Sorry...
Title: DM602 Netgear Router/Modem
Post by: Mark R on March 26, 2004, 02:52:28 PM
Cheers Elwyn thanks anyway.

i think its a dns problem
Title: DM602 Netgear Router/Modem
Post by: Mark R on March 26, 2004, 02:53:05 PM
Cheers Elwyn thanks anyway.

i think its a dns problem